Hello All,

ASHRAE and ICC released a draft standard for operational and embodied GHG evaluation.  It's on a fast track to be completed in time for the next code cycle.  This 30 day advisory draft includes dozens of questions looking for feedback from experts like all of you.  Please take a look and provide comments.  I've uploaded the... Read more

Hi there SCLers,

Hope everyone is safe and healthy. I am posting on behalf of the Steeering Committee to let you know that the Committee has now adopted a Core Purpose Statement for the SCL Group. Please give it a quick read; we will likely sit with this and spend some time internalizing what it means at the upcoming Summit. 

The... Read more

Rotary Uninterruptible Power Units

Power interruptions and brief changes in voltage can damage electrical equipment, compromise computer data, shut down manufacturing, and endanger hospital patients. In the case of power outages, generators usually take over, but about 98% of all interruptions last less than ten seconds, and there is a... Read more

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

Welcome to the quiz portion of Introducing Fitwel v2.1!

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the purpose of the Fitwel standard, including how it advances the goals of health and well-being of building occupants—as well as public health.

2. List nine ways in... Read more

I'm so excited to share that the call for submissions is now open for 16cubits, a design festival and competition for the Jewish holiday of Sukkot, to take place at Berkeley’s Urban Adamah in October 2024.

Please share with anyone you think might be interested! Our hope is to create a forum for builders, designers, and architects to... Read more

Checking in to see if any of you have had good job site success with plastic water bottle recycling. Due to the LBC recycling requirements, we have to source separate onsite, and we're trying to has a separate plastics bin. For the most part, water bottles is going to be on of our biggest contributors.

Hi everyone - in doing a carbon footprint for our firm, does anyone know if buildings that we design as Architects considered scope 3 emissions, or are they beyond the boundary of emissions? LMN's buildings, despite best efforts, are cumulatively multiple orders of magnitude above our scope 1 and 2 emissions. We have never included these... Read more

Hi all,

I'm curious if anyone has insight as to the "New Federal Building Performance Standards" that were announced in May of 2021 and then referenced again when E.O. 14057 came out. The memorandum for heads of agencies that was sent out with E.O. 14057 said that the CEQ would issue these standards, but I can't find a commitment to when... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Section 901.5.1.3 of the 2018 IgCC includes a requirement that "A critical review shall be performed by an external expert independent of those performing the LCA."  I'm curious as to what other's experiences are with having an external expert review an LCA - how does one find such an expert?  Do you have any favorites that you'd recommend? ... Read more

Is your team ready to increase its sustainability knowledge? A team membership allows colleagues to work and learn collaboratively. We offer 10-person, 20-person, and 30-person team memberships. Make BuildingGreen your team's all-in-one... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

All,

The Idaho Division of Occupational and Professional Licenses (DOPL) has undertaken the Zero-Based-Rulemaking process this year to eliminate all requirements that are not specifically life-safety related.  As such, they have proposed removing the International Energy Conservation Code (IECC) 2018 provisions regarding commissioning... Read more

Hi SAL friends,

As some of you have heard by now, we've decided to shut down this Peer Network.

After several years of trying, we have not managed to activate it as we had hoped. Given the urgency of the collective action we need to transform the building industry into a force for good in the world, we all need to focus our... Read more

Welcome to the quiz portion of LEED v4 Tips from Early Adopters: Earn High Ratings Without Added Costs.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how the Integrative Process credit rewards good design but is tricky for taxpayer-funded projects.
2. Describe how... Read more

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more

Depending on seating type­­, these products can contain PVC, toxic flame retardants, hazardous adhesives and finishes, and other unsustainable materials.

BuildingGreen-Approved Seating

BuildingGreen’s seating meets ONE of the following sets of criteria: