Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Have any of you relied on Green Badger for LEED documentation on projects?

I am familiar with the tool and know Tommy from my time in Atlanta, but have not used it on a construction project.

Have you found value? Thoughts?

Either way, they publish a pretty nifty "LEED v4 Construction Tool Kit" that may be useful for your... Read more

Hi: Please check out the fantastic editorial from Ned Cramer at Architect on "The Future of Architecture Education is the Future of Civilization". The deadline to comment on the latest draft of the NAAB accreditation criteria is November 22 and, as in the past draft, it falls far short of prioritizing climate action and sustainability. VERY... Read more

Jenny/Dan:

What types of content do anticipate having in the Documentation Toolkit tab? Here's an example of what we have on LEEDuser:

https://leeduser.buildinggreen.com/credit/EBOM-2009/SSc5#tab-docs (login required)

The layout is a little complicated on LEEDuser, since we had to work with a lot of legacy content, but... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Asking for a colleague:

"Have you ever had a large number of fire retardant tarps used to temporarily enclose a building during construction? Do you know of any solutions for recycling/reusing them or another product that doesn't use toxic fire-retardants that meets the performance criteria?"

I think we've all seen poly or fabric... Read more

Following the summer SDL summit - we formed a spinoff user group called "Carbon Sync" to discuss Life Cycle and Carbon Assessment tools like Tally and Athena.  We've had three successful calls with folks sharing a couple 5-minute presentations about various studies and explorations.  We have a mix of experience levels - but are collaborating... Read more

Greetings to all of the AEC SD Leaders (a.k.a. the Green Gurus)!

Over the last two months, the 32-member Build-Back-Better (BBB) letter working group has developed a robust list of first 100-days, built-environment-focused executive actions for the Biden administration to consider. Kara Kempski, the AIA’s Director of Federal Relations,... Read more

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

I'm sure most (if not everyone) is aware that LEEDv5 is under public review until May 20, 2024. I know I need to make time to flip through it, review, and comment, but I'm having a heckuva time protecting the time in my calendar to do that. Anyone interested in joining me for a 60 - 90 minute meeting to do this together as an accountability... Read more

Hi folks!

Do you have examples or case studies of projects with compelling examples of circularity/salvaged material reuse? We’re looking to go beyond the examples we've seen of furniture reuse or creating art from salvaged material, and we’d like to collect some examples to get our client excited about the possibilities in a deep... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more

Hey all - sorry I won't be able to join our call today. I had a client request an emergency meeting today (boo) because corporate mandated that they eliminate fossil fuel use from all their buildings (yay!) by 2025 and they've got a project underway that needs to pivot quickly. 

Had I been able to join, I wanted to share this in case... Read more

Hi All,

Someone just told me that 80% of his previously certified Energy Star Projects no longer earn certification with the update baselines.  Have any of you started digging into this yet?

-Meredith

Welcome to the quiz portion of Know Thy Client: 9 Un-Green Strategies for Delivering Better Buildings

Learning Objectives
Upon completing this course, participants will be able to:


1. Focus on a client’s values to drive sustainability solutions.
2. Define the quality of the work being delivered to underscore... Read more