Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Hi - We have some projects within reasonable reach of ILFI's Zero Carbon Certification, which will require purchasing some off-site renewable energy. As a State Building Code Council member, I'm also eyeing the Zero Code which we will seriously consider in the next 12 months; this also requires a purchase of off-site renewable energy. 

I... Read more

Welcome to the quiz portion of Full-Blown Energy Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the role of the energy modeler and how each energy model opens an informed discussion between the entire project team about the interactions between architectural and... Read more

Has anyone seen a comparison between IECC 2021 and previous versions of the energy code, including ASHRAE 2010? I'm curious how far ahead code buildings are relative to LEED v4.0, and how much the latest IECC raises the bar relative to the previous. I did a quick search for the LBNL and other studies that look at this, but didn't see anything... Read more

Hello Green Gurus,

Back at the retreat in March 2021 (does anyone remember back that far?), we formed an Air Quality Working Group with members from SDL, SMEPL, and SCL. Drawing on our collective experience, standards, research, and other resources, we began navigating the murkiness of indoor air quality considerations. We came up with a... Read more

Hi All, 

My understanding is that SCL reporting is only for refrigerant use, or recharging for headquarters. I've asked our MEP contractor for a list of our 21 units, refrigerant use, and what quantity of refrigerants were used to charge equipment during installation or service.  

Is anyone tracking this for job sites?... Read more

Hi folks,

We have a really great webinar set up for Thursday, Oct 25 at 2pm eastern. This one is based on the 5-minute presentation from Heather DeGrella at the Summer Summit--our jaws were on the floor when she presented it there, and we were hungry for more.

Sign up here: https://zoom.us/webinar/register/... Read more

Hello SMEPers,

I’m hoping to crowd source some anecdotes for a guest lecture I’ll be giving at Yale’s architecture school. The topic is integrated design (especially between architects and engineers) and how it enables better sustainability outcomes.

John Boecker has this great story about how choosing a paint color with higher... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be... Read more

We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks

Hi - we're working with the University of California Office of the President to put together low-carbon case studies. The two types we are looking for now include 1) a low-carbon TI (not a full building gut/renovation), and 2) any that involve the circular economy (in this case not just building reuse but product reuse) which could include... Read more

Are you ready to share the story about your best projects?

AIA COTE Top Ten Awards is a great way to get recognition for your best work and the call for submissions for the 2024 cycle is now open!

The awards cycle has shifted, and the deadline for the 2024 awards is October 26.

So NOW is the time to pull together... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

Something we seem to be seeing a lot in our market recently are projects split into multiple packages - footing / foundation, C&S, and then later a TI package of CD's... mostly in an effort to speed up permitting and construction schedules. (Oftentimes with a contractor on board for a design / build approach). 

My question to the... Read more

Amanda is BuildingGreen's Peer Networks Manager, working behind the scenes to support the Peer Networks team and members. They are passionate about sustainable design and love helping people find tangible ways to help the planet.

Prior to joining BuildingGreen in 2023, Amanda was a campaigns coordinator at a food justice... Read more