Hello Green Gurus,

Here are all the details about our Peer Network event in NYC on Wednesday, September 28th. If you'll be in town, we hope to see you!

From 1-5pm we'll have the NYC Regional Mini-Summit, open to members of any of the five Peer Networks (Sustainability Consultants, Community Design Leaders, Contractors, Architects... Read more

Hello Everybody,

I would like to invite you all to an event being hosted by the AIA Seattle COTE.  This is the next event in a series entitled Pathways to Decarbonization.  Date and time: May 13, 12:00pm - 1:00pm 

Description:  Universities are learning laboratories to explore and implement solutions to our greatest challenges... Read more

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

Hey All,

Those of us in the electrification working group have been talking about the impending release of this new NREL tool, which provides hourly (TOU) GHG emissions forecasts for grid regions around the country. This will be a useful tool in evaluating the impacts of HVAC electrifcation, EV integration, load shifting, storage, etc. I... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

Hey everyone, 

With the coming In-Use Off-Road Diesel-Fueled Fleets Regulation | California Air Resources Board we have been doing some research on availability of R-99 fuel prior to the January 1 start date. One thing we aren't finding in the research is an estimate of cost impacts. Has anyone started rolling out R-99 on their sites yet... Read more

Following up on one of our conversations on the vision vacuum and sustainability beyond certifications, I would like to help facilitate an offline conversation with anyone working within their firm to use the AIA COTE measures as a guiding framework in their firms/projects. Attached are my slides on my first pass at thinking about this at Page... Read more

As if you weren't worrying enough already, here's a little something that I ran across through monitoring activity on the American Society of Healthcare Engineers discussion boards:  https://www.id-hub.com/2018/10/17/hospital-plumbing-reservoir-resistance-interview-amy-mathers/, "Hospital Plumbing as a Reservoir for Resistance".  This is both a... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

I know that there is a risk of starting a whole flurry of congrats through the forum, but this is a biggie, and deserves some recognition:

Congratulations Andrea and Melanie!! Huzzah!!

And a reminder--If you want to reach out to them privately, rather than through the forum, with your message, you can see anyone's email address by... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Are your clients asking you about wellness? You’re not alone. Healthy interiors and wellbeing are the trending buzzwords of sustainable design. Lighting design for circadian rhythm and water filtration methods might be on the... Read more

Dear Esteemed colleagues: I was recently asked a good question in light of the impending (fingers crossed) passage of the reconciliation bill that will bring alot of funding to energy efficiency/decarbonization upgrades at the residential scale. The question is: What are the arguments/ scenarios about the importance for homeowners to contract... Read more

High-performance buildings integrate site-responsive orientation, climate-responsive form, hefty R-values, efficient mechanical systems, healthy... Read more