Championing the
Changemakers

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

Thank you for your interest in the Sustainability Leaders Peer Networks hosted by BuildingGreen. We have received your application.

A BuildingGreen team member will be in touch with you soon via email to discuss next steps in the application process.

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

In order to successfully contribute to a LEED project, it is important to have an understanding of how the LEED process integrates within a typical design and construction schedule. Every new construction or renovation project, whether large or small, moves through certain project phases beginning with design development, design completion (... Read more

Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

For a number of years a colleague and I have been teaching a course about sustainability and water in architecture at the University of Pennsylvania's architectural school (PennDesign).  This year we're hoping to bring a few new opinions to the table for at the same time as we broaden the discussion.  Because the class will be virtual again... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

Hi folks,

We’re working on the agenda for what’s shaping up to be a really awesome Summer Summit at a great new venue in Massachusetts. There is an awesome group already registered, and we’d like to fill the remaining slots soon so that we can develop the agenda with your input.

If you’ve been planning to register, please do it... Read more

Hi all,

Just like many of you, our firm is dedicated to increasing representation in the professions and through its relationship to the AIA Large Firm Round Table was able to access a National Organization of Minority Architects Fellow this summer. We’re loving our work with Himesh thus far, but it’s unclear whether we have the workload... Read more

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

Ace Brockwell

Welcome to the quiz portion of Climate Change: Building Industry, You’ve Got This!

Important: This quiz covers all related articles within this topic. Scroll to the bottom of the article page to find links to all the articles covered by this quiz.

Learning Objectives
Upon completing this course,... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

For those that missed Z's subtle mention of this a few weeks ago, Bora finally decided sustainability is important enough to have someone dedicated full-time to it, and then went out and got one of the best:

https://bora.co/bora-hires-sustainability-director-corey-squire/?tax=all-posts

I've been sharing Corey's thoughts on... Read more

Are your firms discussing the health effects of silica dust on people working with engineered stone and the recent announcement of the upcoming ban in Australia, as of July 2024?

https://www.dezeen.com/2023/12/14/australia-bans-engineered-stone-silico...

According to the article, a recent report says that there is no safe level of... Read more

HI All,

I am curious if others are using THERM in-house for your envelope design?

We usually use our building envelope/curtain wall consultants (Boston - so mostly RWDI and Heintjes) but our teams are finding that they need the information faster than our consultants can provide, they are backlogged, or we have some curtain wall... Read more