Championing the
Changemakers

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Hi Gang, 

We are looking to implement the contractor commitment and are running into COVID-19 protocol barriers when looking at the Jobsite Wellness category specific to the soap as well as the food storage/eating areas on site. Anyone else run into this issue? 

-Kena 

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

Hi folks, 

A few of us at SERA recently connected with a couple of women in the tech industry who are looking to solve sustainability issues with new software. They're in the "problem definition" phase and are eager to hear from SDL members about the big issues around operational and embodied carbon that we're tackling. See below and... Read more

Bobbie Socks

Hi all,

Due to the eclipse, Nadav and I will be out on our usual call day, April 9th, and we anticipate others may as well. We will be moving the call to Tuesday April 16th at the usual time (2-3pm ET). For this meeting, we'll be holding a whiteboard session about MEP2040, the development of plans to achieve it, and tactics to getting... Read more

The Sustainable Design Leaders peer group brings together the most committed sustainable design directors from leading architecture firms throughout the U.S. and Canada. We invite you to apply for membership.
We look for the... Read more

Welcome to the quiz portion of The Value of Variability.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand why variability is important to the comfort and well-being of building occupants.

2.  Define “alliesthesia” and explain how it relates to the well-being of occupants... Read more

Hi All,

I just tried to post a minute ago but it said my connection was lost, so I'm starting over again. You may see two similar posts from me.

Alejandra and I started a document (attached) with ideas on how we can tackle some of the issues we are currently facing with zero waste, as a follow up to our conversation last Friday... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Stick-framed walls are labor intensive and have to be sealed and insulated in the field, where conditions are not ideal; this can lead to poor thermal performance.

BuildingGreen-Approved Structural... Read more

HI MEP Leaders,

Related to our thread about equipment needed for decarbonization, I have a question about what new or improved equipment is already available now that you're excited about.

Every year we at BuildingGreen publish (and present at Greenbuild) a listing of the Top-10 new and exciting products. Our focus this year is on... Read more

Hi all -

I got this yesterday from Renew Oregon, a credible environmental NGO here in the state.

"A secretive special interest group has filed a petition at the Federal Energy Regulatory Commission (FERC) to take “net metering” rules away from states and make it a federal issue.  Net metering is the program that allows homes and... Read more

Now that Ben has set up access restrictions, we have to decide what message to put on "paywall" screens. For example, on the Best Practices pages, the "Official language" tab is fully accessible, but if an anonymous user clicks on any of the other tabs they'll hit a login wall:

https://live-bituser.pantheonsite.io/best-practice/energy-... Read more

Welcome to the quiz portion of Protect Your Spec: 14 Strategies. 

Learning Objectives
Upon completing this course, participants will be able to:


Identify ways to ensure continuity between the environmentally preferable materials in a project specification, and the less-than-ideal materials that end up used in the final... Read more

https://www.usgbc.org/articles/us-green-building-council-celebrates-2021-class-leed-fellows

I'm sure you will see many familar names on the list - not the least of which is our fellow SMEPL:  Sarah Gudeman.

Congratulations, Sarah - well done!

Hope you can join the Small Firm Sustainable Design Leaders CALL this Thursday, 12/12 @ 1pm Eastern. 

                Join Zoom Meeting
                https://zoom.us/j/629388002

AGENDA

Nadav will lead a conversation about the new(ish) sustainability clauses in AIA’s Code of Ethics

1. Do you think that they... Read more

Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more