BuildingGreen Report

Explainer

July 1, 1992
Wet-spray Cellulose

While dry cellulose in curtain-truss cavities provides a very attractive system environmentally, there are other—more common—ways of using cellulose insulation in walls. In new construction, the most common is wet-spray installation, in which cellulose is mixed with water and (often) an acrylic binder and sprayed into... Read more

News Analysis

July 1, 1992
Disappointment at Rio

EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more

Explainer

July 1, 1992
Curtain Trusses with Cellulose Insulation for a Timber Frame

Many timber-framers are aware of the problems with CFC-based foam insulation but continue to use urethane-core stress-skin panels because they haven’t found a better alternative. Well, here’s a technique adopted by a Massachusetts builder for low-budget timber frame homes. The... Read more

News Brief

July 1, 1992

Energy Source™ Directory

Life has been a whole lot easier around the office since the

Energy Source Directory arrived. Assembled and published by Iris Communications, this is the most complete and most useful guide to specialized products and materials used in energy-efficient construction that we've seen. The 500-page directory is... Read more

Product Review

July 1, 1992
Formaldehyde-free Interior-grade MDF

Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more

News Analysis

July 1, 1992
Green Builder Program in Austin Recognized at Rio Summit

The City of Austin’s Green Builder Program was one of 12 award recipients in the United National Local Government Honours Programme at the Earth Summit in Rio, and the only winner from the United States. “The purpose of the Honours Programme is to recognize innovative local approaches to... Read more

Feature

Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.

July 1, 1992

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

News Brief

July 1, 1992

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Feature

July 1, 1992

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Op-Ed

Introducing the first issue of our newsletter.

July 1, 1992
Welcome to Environmental Building News

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Feature

Susan Maxman is the first AIA president to make sustainable design a priority. 

July 1, 1992
Interview with Susan Maxman, President, AIA 20 June 1992

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Forum topic

Just an FYI that BG's web team is planning on attending your meeting at 1:00 EDT. We will need information on how to join since the info in the invite didn't work last time.

See you all then.

Product Guide

The opportunity for water savings from installing efficient toilets, and from toilet replacement, is significant. In addition to improvements to the traditional gravity system, pressure- and vacuum-assisted flushing systems are available that offer superior performance—albeit often with some increase in flushing noise.

Cautions Certain... Read more

Forum topic

Sitting in SFO after an exhausting but also weirdly refreshing Greenbuild. Saw many of you at the Peer Networks event, which was so awesome!

Before my flight boards, I wanted to let folks know we're seeking a new Editorial Associate. It's pretty entry level with lots of room to grow. If you know a talented writer who's got background in... Read more

Author

Ada Fran Maman

Forum topic

Hello Green Gurus!

The Climate Smart Wood Working Group would like to give a boost to this Ecotrust initiative to support the market proliferation of mass timber with science that attributes carbon impacts to wood building products. As many of you are aware, a couple years ago, the University of Washington partnered with Ecotrust to... Read more

Forum topic

Hi All! 

We have had a few multi-family projects consider this single package vertical unit with integrated ERV, but we haven't pulled the trigger for fear of the unknown. Our local engineers aren't sure how it actually performs and worry it may not meet code requirements for separation between exhaust and intake. Has anyone else used... Read more

Forum topic

Hello there, 

I am working on a project with indoor plants and active green walls. I would like to design lights for growing plants and people at the same time (which seems to be a non-obvious problem). 
 

I was thinking of Philips, GE, Shneider Lighting, etc. Would you recommend someone I could talk to and eventually engage... Read more

Forum topic

Within the confines of the BuildingGreen safe space, I wanted to share the Forced Labor in the Building Material Supply Chain Mitigation Framework I shared at the 3/1 First Friday Fika. The intent is for this document to become public, but we are working through some permissions and final editing logistics. The project was collaborative... Read more

Forum topic

Hello Everyone!

We’re beginning to plan events for the rest of 2021, which means we need your input to make sure we are putting together structures and content that are most valuable for you.

Please take a moment to take this brief survey DUE June 25th! You will find details on our current thinking for these events within the... Read more