Championing the
Changemakers

testing

Here’s a nice NYTimes op ed on urban density that directly addresses the concern Gwen raised on out call today: 

https://www.nytimes.com/2020/03/24/upshot/coronavirus-urban-density-risks.html?referringSource=articleShare

Standard HVAC systems require large fans and ductwork to move conditioned air throughout a building, which wastes energy and building space.

BuildingGreen-Approved Chilled Beams

BuildingGreen lists chilled beams that rely on water and smaller ducts to provide HVAC throughout a building.

Performance and Health Considerations... Read more

Hi all, 

The San Francisco Department of the Environment is hoping to gather info from designers and specifiers about construction surplus materials. Their survey is 8 questions total and not limited to those in the SF area. 

Pasting info below if you have a chance to participate! 

Calling Designers and Specifiers:

... Read more

Hello SCL,

We've heard you ask for more ways to connect with your SCL peers. So, we are happy to announce that we will now be holding bi-monthly calls where the entire SCL network is invited. These calls will be limted to SCL members (with the exception of guest speakers) so please don't share the information with colleagues. 

The... Read more

Hello Sustainability Leaders!

Here's another fun announcement to help round out this year and get us excited for the next to begin: Join us in 2022 for First Friday Fikas!

What is a fika? Pronounced fee-ka, this is a Swedish custom of taking a break from work to have a coffee and a snack while catching up with friends. It’s a... Read more

Hi! Just saw this White House press release stating that federal suppliers will need to report on scope 1 & 2, and relevant scope 3 emissions and climate-related financial risks as well as set science-based emission reduction targets. The cutoff for disclosure requirements is $50m in federal contracts. Curious whether this affects any... Read more

Has anyone come across any (embodied) carbon emissions calculator for water?  Perhaps per region/state?  

Thanks in advance!

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon... Read more

Hope I'm posting this in the right place.  I have a client who's interested in estimating the embodied carbon of multiple buildings (primarily apartment buildings) they own and operate.  Not sure if I'll have access to drawings or area takeoffs of materials for their buildings.  How would you approach this?  Would appreciate input on resources... Read more

Welcome to the quiz portion of Choosing Insulation: Health and Environmental Considerations – Unit 1.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works.
2. Summarize how insulation performance is measured and reported.
3. Recount the wide... Read more

Welcome to the quiz portion of An Advocate’s Guide to Resilience Regulations!

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how U.S. municipalities are using codes to improve the resilience of the built environment in the face of worsening climate change.

2. Delineate five... Read more

We just wrapped up an awesome Winter Summit at Gulf State Park in Alabama. I'll be posting flip chart pages and notes here--we can use this forum to continue the conversations. 

Apologies for the flurry of emails, but it seems best to start separate threads for each topic. If you'd rather limit the flow, you can switch to daily digest... Read more

Good morning:

I am hoping someone can point me in the direction of any higher ed campus standards or policies focused on plug load management, occupant behavior related to energy, etc. I'm especially interested in any examples of communications to faculty or students encouraging behaviors that reduce energy consumption. Thanks!

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more

Dear SDL'ers

After many months of soul searching about my role as a sustainability leader and how to have the most positive environmental impact, I have decided to take a leave from practice to pursue further studies this September. I will be undertaking a two year Master’s degree at the Institute for Resources, Environment and... Read more