Championing the
Changemakers

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Hi all,

I've been working on a LEED project in California for months and our energy modeler wants to use the LI 10480 Title 24 2019 pipeline to demonstrate compliance under LEEDv4. Only problem is, I've never done it that way before, and our modeler and I are consistently speaking in different languages. Anyone done a project under this... Read more

Welcome to the quiz portion of Know Thy Client: 9 Un-Green Strategies for Delivering Better Buildings

Learning Objectives
Upon completing this course, participants will be able to:


1. Focus on a client’s values to drive sustainability solutions.
2. Define the quality of the work being delivered to underscore... Read more

Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

Hello Green Gurus,

We’re always trying to improve this online space, from adding an events calendar and 5-minute presentation recordings, to creating a filterable member directory. We have several other ideas in the works, and we’re looking for a group of Peer Network members to help us test them before they go live.

Requirements... Read more

Hi folks,

USGBC has commissioned this survey of the building industry about Federal tax incentives for building efficiency. They will be sharing results with congressional staff, so this might be a good opportunity to give them feedback from the field!

And it's just 10 minutes.

And, after you do the survey if you want to... Read more

Hi,

Has anyone been asked by a client to track welding rods on any projects? We were recently asked to do this. I was asked why the client would ask us to do this. I don't know if it has to do w/ "real property" and is a property tax-related reason, or if it is an environmental/sustainable reason. There is piping associated with the... Read more

BuildingGreen Approved, like its predecessor, GreenSpec, is an independent product evaluation service for BuildingGreen members. We offer an unbiased look at products: BuildingGreen does not accept any manufacturer fees for our evaluations. Here’s a quick tour of the platform and how to use it.

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

All,

We are collecting examples of buildings that involved electrification initiatives (building does not need to be all electric as long as largely electric). Please share your projects with us through this short survey. It will take 8-10min to complete.

The study will culminate into a report and best practices to advocate for... Read more

Hi Leaders,

We've pulled together some highlights from each of the three half-day cross-network workshops that happened in October. This report captures the gist of each workshop:

We are pursuing sustainability goals (and documentation of those goals) outside of any certification/rating system for a current project.  However, we have set up a criteria list of goals by following strategies/credits from many of those systems (LEED v4 EPDs, SITES v2 threatened tree species, WELL v2 mindful eating, etc.).  This approach is... Read more

Anyone has experience with CertiPUR-US? I’m having a hard time finding assurance documentation for foam padding for seating.

I would appreciate any feedback or experience on CertiPUR-US program or any recommendations on product.

Hi MEP Leaders,

Just a reminder that our monthly call is next Tuesday, July 11, at 2pm ET. Chris Colasanti will be presenting on impacts of different facade characteristics on overall energy performance! 

All Network members are welcome to join. Here is the agenda, and below is the Zoom info:

Join Zoom Meeting
https... Read more

Hello SCL members,

A gaping hole has been left since Patty Lloyd stepped down from our SCL steering committee. Don't worry, she is still in the network and tirelessly championing SCL. But this means we are opening up nominations for at least one leadership spot. If you are interested, please email me directly (candace@buildinggreen.com)... Read more

Dear All!

I recently met a passionate new hire at an architecture firm in NYC.  Her firm is reluctant to taking meaningful steps towards increasing sustainable impacts of their projects.  (Their work is in market rate of all types.)  This new hire is frustrated with the lack of sustainable adoption and understanding.

What would... Read more

https://www.architects.org/awards/sustainable-design-0

All,

My BSA Co-chair, Steven Burke, and I want to make you all aware of the BSA Sustainable Design Awards coming up soon. Please see the above link for qualifications and registration information. This is an award which is attempting to work towards the same stringency, rigor... Read more