Championing the
Changemakers

We are working on a tenant improvement and want to determine the embodied carbon on bookshelves, product display cases, and desks. Initially finding that Tally is not reading furniture, casework, or fixture families. Are there any tips and tricks you have found to be successful for modeling or defining FFE items in Revit and quantifying... Read more

Our all-volunteer Advisory Board helps BuildingGreen identify the most critical topics for our coverage, and directs our research as we investigate these topics and bring them to our readers. Their distinguished and varied service in the field of environmentally responsible building is an inspiration.

For those who haven't heard yet, we've reached a critical milestone with the Contractor Commitment. 51% of the SCL network voted to approve the language of the current draft. That's the mark we needed to hit, so we can move forward with planning the launch! Thank you to all those who have worked tirelessly over the last two years developing... Read more

Plans are coming together for this Summit! Here's what we know (at least tentatively) so far:

Location:
Chicago, SmithGroup office

Timing: 
July 9-10, 2019

1:00 p.m. start time on 9th, 3:00 p.m. end on 10th

Hello,

This is not my area of expertise but our contactor has suggested central heat pump hot water (CHPHW) is $1m more expensive than gas fired domestic hot water for a 150 unit multi-family residential building in Massachusetts. The Building Decarbonization Practice Guide is extremely helpful but, from their comments, it is all coming... Read more

Team,

As you all probably saw, Boston is discussing using both CEI (carbon emission intensity) and EUI as basic scope of work.  Maybe the more surprising thing is China announced a new building code next year to include carbon emission analysis as a basic scope of work for all buildings.   New buildings in 2022, among other things,... Read more

In this live webinar on the sustainability of wood construction, we tap the expertise of leaders in the field and look into three main issues:

Exterior doors often have poor insulation and seals that allow air through.

BuildingGreen-Approved Exterior Doors

BuildingGreen has different criteria for commercial and residential exterior doors.

Commercial swing (hinged) doors must be NFRC-rated, certified, and labeled for U-factor. They have a maximum air leakage of 0.... Read more

Here are additional slide decks from people who presented in one of our general sessions: at Max's Pot, or in the mornings. Also Jerelyn's Wednesday evening presentation on BuildingGreen's work on sustainability literacy.

Among those included here are my slides on the Rich Earth Institute and urine diversion into fertilizer--did you... Read more

Hello All,

Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Jobsite Sustainability Tracking Tools. We hope you will join us!

Register HERE.

Jobsite Sustainability Tracking Tools
Tuesday, May 18th, 2021
2pm - 3pm ET (11am - 12pm PT)

Description

‘You can’t improve what you don’... Read more

Welcome to the quiz portion of Occupant Engagement: Where Design Meets Performance.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate at least five methods being used to provide feedback to occupants so that they better understand how to interpret, and respond to, their... Read more

Is there a list of which number corresponds with each Best Practice? E.g. "03 Energy Audit & Planning."

What is the lag time for historical embodied carbon data catching up with real-time information as manufacturers source renewable energy? Is our professional time best spent calculating with out-of-date information or more simply calling for manufacturers' elimination of fossil fuel combustion in their production and transportation of materials... Read more

Hello Sustainable Advising Leaders!

I have an exciting announcement today, fall Peer Network events are now open for registration! You can see all the event details and register here!

Based on feedback we received from past events and the most recent surveys, we decided against doing one long week of events for this fall and... Read more

Welcome to the quiz portion of Full-Blown Energy Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the role of the energy modeler and how each energy model opens an informed discussion between the entire project team about the interactions between architectural and... Read more