Championing the
Changemakers

We broke up into 5 discussion groups by market sector:

Here are the proposed "guiding questions":

Happy Monday all!

i am looking for ROM on cost premium for LEEDv4 to go from Gold to Platinum and from Gold to Net Zero, anyone have any stats?  just looking for % premium.  Our projects show around 1% to get to Gold but not sure what it looks like above that.  Thank you!

Hi,

Has anyone used a sustainable product that complies with the EQc Low-Emitting Materials requirement that is a general construction adhesive similar to Liquid Nails? I've checked the Mindful Materials website and can't find anything. I found Red Devil General Prupose Construction Adhesive on UL Spot, but have never used it before. Any... Read more

Greetings friends.

Many of you have heard about the CARE Tool, (formerly the 2Build or not 2Build Carbon Calculator.) We are now in the final stages of bringing it online as a free, open access tool hosted by Architecture 2030. We are finalizing and aligning data and working with a web developer (the same one that brought us... Read more

Hello SCL,

We are getting back to our usual schedule of a pre-Greenbuild SCL Summit. We will be opening registration and announcing topics shortly. In the meantime, please pencil us into your calendar.

Date: September 25, 2023

Location: ZGF Architecture 600 14th St NW #800, Washington, DC 20005

Time: Soft start at... Read more

Welcome to the quiz portion of No More Red Lines: Undoing Our Legacy of Urban Segregation.

Learning Objectives
Upon completing this course, participants will be able to:

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Commercial, institutional, and industrial buildings are the primary applications for large translucent wall and roof panels. Some products offer excellent energy performance while providing daylight into interior spaces.

BuildingGreen approved translucent panels

Due to concerns about BPA (bisphenol-A), BuildingGreen does... Read more

Welcome to the quiz portion of Reexamining Priorities in Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define green building priorities from a few different angles (separating process priorities from outcome priorities).
2. Differentiate those priorities... Read more

We're thrilled to announce that, for the first time, the 2025 Summits for each Peer Network will be hosted within one week and in a single location. You’ll get the deep peer-to-peer time you love from a Summit AND some glorious cross-disciplinary time to experience the power of the Green Commons. It’s all happening at the Kimpton Cottonwood, a... Read more

Hi Green Gurus,

A "fun" take-away from the sustainable MEP Leaders Summit (just ended today):

Inspired by Passive House, we are embarking on a campaign: "Low Load Buildings Are SEXY".

One idea we have is:  what if the AIA design awards set limits on metrics like heating loads to meet basic eligibility?

If you have... Read more

Building materials emit massive amounts of carbon long before the lights go on.

In this course, BuildingGreen takes an analytical look at the greenhouse gases that are emitted in the process of constructing our buildings in the first place—the embodied carbon. The report focuses on how architects and designers, working with other key... Read more

Here’s a nice NYTimes op ed on urban density that directly addresses the concern Gwen raised on out call today: 

https://www.nytimes.com/2020/03/24/upshot/coronavirus-urban-density-risks.html?referringSource=articleShare

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Just an FYI that BG's web team is planning on attending your meeting at 1:00 EDT. We will need information on how to join since the info in the invite didn't work last time.

See you all then.