Championing the
Changemakers

Hello, folks! We recently had contact with Northeastern University about sand. I know it sounds ... dry. But sand shortages are a serious issue globally and are leading to criminal activity everywhere and even "sand mafias" in poorer nations without resources to enforce mining laws.

The ask from Northeastern is that BuildingGreen amplify... Read more

Hi everyone, 

We’re excited to announce that registration for the Spring 2024 Sustainable Construction Leaders Summit is now open! Join us at Perkins&Will’s Atlanta office on May 6th, the day before the Living Future Conference. Register early to save your seat, and feel free to reach out to me with any questions at amanda@... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

Hello all,

I am reaching out to this community as SMMA has a job opening for a Sustainable Design Analyst (like many of you recently posting job openings on this forum).

Here is the job posting link: https://smma.applytojob.com/apply/mah0aDkOJ0/Sustainable-Design-Analyst

Please note that this position will support... Read more

I am dual posting a topic from the SDL forum in the Green Commons. Sorry to those who see this twice but I'm trying to cover more ground.

The first post from Mike Manzi ... 

SDLers,

Great to see many of you at Greenbuild! It was nice to have the opportunity to remind everyone how our collective energy continues to make a... Read more

Hi All - I wanted to share out the All For Reuse initiative below by two peers in the sustainable materials management network. I know some SDL have already done much research on this from quite a few angles, and those with LBC experience probably even moreso in practice. 

Frances Yang (Arup) and Andrew Ellsworth (Doors Unhinged) have... Read more

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

BuildingGreen is the most trusted voice in sustainable design and architecture.

This ad-free, member-supported resource is here to guide designers in using high-performance strategies, and in selecting sustainable and healthy products.

If you haven't already, start by creating your unique user profile to get your log-in, and be... Read more

How much does every designer need to know? How to support that basic literacy?

Guiding Questions:

Welcome to the quiz portion of What Makes a Product Green?.

Learning Objectives
Upon completing this course, participants will be able to:


1. List and describe at least three attributes that address each of the following categories: "efficient use of materials"; "responsible sourcing"; "energy and water... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hello Green Gurus!

ILFI’s annual Living Future Conference is coming up, so we thought we might host a (virtual) Show & Tell session of 5-minute versions of peer network members’ presentations like we often do in conjunction with Greenbuild. First we want to see if this is of interest to you all. Please take 30 seconds to let us know... Read more

This question came to me via our mutual friend Josh Jacobs, but while interesting it's a bit out of my range of expertise... 

In short, a critical materials assessment specifically focused on airbourne byproducts from a manufacturing process that would be first-of-its-kind in the U.S.