Championing the
Changemakers

I'm putting together information on natural gas bans (or put another way, all electric buildings) for an advocacy effort and looking for some experts. Anyone have thoughts on banning natural gas and other fossil fuels on residential projects? Specifically what are the considerations/challenges/opportunities at each scale (single family, low... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Welcome to the quiz portion of Climate Analysis for Architects (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Access climate data.
2. Choose appropriate design energy simulation tools.
3. Know when and how to run analyses with projected weather data... Read more

Greetings to the Green Commons!

Those of you who attended Greenbuild may remember that during one of the keynotes, Ali Zaidi - White House National Climate Advisor, announced that the White House was developing a definition for "Zero Emissions Buildings" (here’s a [LINK] to a related Washington Post article). The draft language for the... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

Hi all! I'm very excited to report that we have interest from a developer client in tracking embodied carbon through construction. We have issued construction documents and the construction managment team is begining the process to establish the GMP.

We're looking to use EC3, and/ or ZGF's LCA analysis tool for concrete to look at how we... Read more

Hello everyone!  There hasn’t been much activity on this forum in recent months, so we wanted to give an update about what’s been happening and things coming up. 

Firstly, we are very excited for the upcoming inaugural SCL Summit the day before Greenbuild.  We currently have about 20 people signed up for the Summit and we are expecting a... Read more

Lauren Shumaker (Turner Construction) and I are starting a group to focus on improving the submittal process, currently focused specifically on healthy & sustainable materials and the use of the mindful Materials library. The purpose of this working group would be to align project management and LEED project software (ex: Procore, CMiC,... Read more

Kelly provides administrative support to BuildingGreen projects, including major contracts as well as event planning, and logistics coordination for BuildingGreen’s network of sustainable design leaders. Among her projects, Kelly coordinated a large tri-state regional economic development project focused on the green goods and services industry... Read more

Hi all - at the suggestion of Nadav and some of the Sustainable MEP Leaders, I'm reposting a thread I started a couple days ago in the SMEP forum.

In response to increasingly aggressive (and effective) targeting of building owners (particularly schools), a group of researchers have put their support behind a letter warning against the... Read more

This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more

Anyone using the USG EcoSmart drywall? I'm writing a short product review and am looking for some quick feedback. I'm particularly curious about reduced greenhouse gas emissions and overall cost. Thanks! Brent

Hello, All!

Looking for some quick insight from the braintrust into how to best approach project goal-setting.

We’ve been taking a critical look at goal-setting practices to better understand what drives the gap between projects that meet ambitious high-performance targets and those that don’t. Recognizing that goal setting is a... Read more

Welcome to the quiz portion of Choosing Windows: Looking Through the Options.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose a frame material based on its structural characteristics, thermal insulation, durability, maintenance requirements, cost, and effects on the... Read more

Has anyone been involved with GBC Italia's Historic Building protocol? They are requesting pilot projects and I'm wondering if anyone has experience using or developing this framework. 

See attached checklist and form. Their website is pretty challenging to use. But so is USGBC...

Thanks!

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more