Championing the
Changemakers

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

How much will it cost to achieve LEED v4 certification?

“We’d love a green building, but can we afford it?”

“We’re required to be LEED Silver, but we’re not sure how to get there under the new rating system.”

“Sure, we’re interested in LEED, as long as it doesn’t cost extra.”

LEED v4 and cost uncertainty

With... Read more

Hello SDLs!

Here are presentations from last week's 2018 SDL Summer Summit Show & Tell Presentations.

Best,

RoseAnn

Hi All,

The SMEPL's Embodied Carbon committee has been hard at work developing a letter that calls for MEP equipment vendors to increase material transparency in their products.  As a way of contacting the most widely-used vendors first, we're asking each of you to enter your "Top 3" specified vendors for each of the products listed in... Read more

Hi folks,

With all the build-up to Greenbuild (don't miss the Tuesday Show-and-Tell if you'll be in town!), I nearly forgot about another opportunity, coming up sooner! A bunch of us will be in Cleveland in early November for the first Building Resilience conference that BuildingGreen is helping to organize with ILFI and the Resilient... Read more

I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more

Hey everyone, 

With the coming In-Use Off-Road Diesel-Fueled Fleets Regulation | California Air Resources Board we have been doing some research on availability of R-99 fuel prior to the January 1 start date. One thing we aren't finding in the research is an estimate of cost impacts. Has anyone started rolling out R-99 on their sites yet... Read more

The ReUse Map created through the Material Flows Working Group is live and got some great traction at Greenbuild (Thank you Nadav and Barbara!).

To keep the map relevant and updated, we'll be looking at how to fund the maintenance of the map, the best ways to get the word out and looking at writing a white paper. If you want to be part... Read more

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

Hello all, excuse the blast and the short timeline -- while not explicity sustainability-related, this is a great way to connect with the future of the profession, and can be a great opportunity for SDL firms on the west coast (a number of SDL firms already participate), specifically in Tacoma, Olympia, San Francisco, Sacramento, or San Diego.... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Hello Sustainable Design Leaders,

I am thrilled to be joining such an esteemed collective of driven thinkers and doers. I look forward to meeting some new faces and reconnecting with some familiar ones in an effort to advance sustainable design in the built environment.

Thanks,

Jonce

Hello Sustainable Advising members,

Nadav and I have created a spreadsheet based on the matrix you all created at the Summit Palooza. The idea of filling this in with your services and activities is to get to know one another better, be able to support each other and build camaraderie. 

Please take the time to enter the necessary... Read more

In a recent e-mail to BuildingGreen subscribers, Paula Melton pointed out that USGBC has opened the call for suggestions for LEED v5.

Every day, I encounter dripping skepticism from building owners about LEED for New Construction, because of the many many times that the fanciful outcomes of energy, water, and daylight models bear little ... Read more