Championing the
Changemakers

Prefabricated, or modular, buildings can provide environmental advantages over conventionally constructed buildings. They are built in factories where manufacturing and cost can be tightly controlled, so materials are kept out of the elements, there is less waste, and thermal properties and air sealing can be enhanced. There are also fewer... Read more

Learning Objectives:

Explore the relationship between smart buildings and cybersecurity through their shared history.

Clarify the difference between OT and information technology (“IT”) cybersecurity including the protocols that drive OT cybersecurity programs.

Provide recent examples of critical attacks on building... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Gather with the Changemakers in Sustainable Construction

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll set the agenda for changes to LEED v5, strategize on... Read more

Hi All,

Jacob Knowles from BR+A reached out with a request and I’m passing it on to you all.  Jacob’s contact info is at the bottom of this so you can respond to him directly or respond here and I’ll forward it on:

We are working on assembling examples of large wet lab buildings that employ strategies to greatly reduce fossil... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

With depth of thought and a broad view of the horizon, Candace Pearson can take a nuanced vision and sharpen it into focus, propelling the team around her forward. Operating in all three of BuildingGreen’s service offerings—publications, consulting, and peer networks—she finds pragmatic ways to fundamentally shift how we create our built... Read more

Following up on the Decarbonizing Existing Building: Envelope + MEP Solutions Integrative Design Jam, a cohort of us determined a "Decision Making Tree Toolkit" that begins to classify decisions into and "if/then" framework using region, market, climate, scale of intervention, and other factors would be useful in helping us collectively move... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Hi folks,

No details have been sorted out yet, but I wanted everyone to have a heads-up that the SCL Steering Group is proposing that we graduate to a full, stand-alone SCL Summit in 2020. (Until now we’ve been squeezing our Summit into the day before Greenbuild, which is good in some ways, but problematic in others—and limits our time... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

As if you weren't worrying enough already, here's a little something that I ran across through monitoring activity on the American Society of Healthcare Engineers discussion boards:  https://www.id-hub.com/2018/10/17/hospital-plumbing-reservoir-resistance-interview-amy-mathers/, "Hospital Plumbing as a Reservoir for Resistance".  This is both a... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

Jenny/Dan:

What types of content do anticipate having in the Documentation Toolkit tab? Here's an example of what we have on LEEDuser:

https://leeduser.buildinggreen.com/credit/EBOM-2009/SSc5#tab-docs (login required)

The layout is a little complicated on LEEDuser, since we had to work with a lot of legacy content, but... Read more

Who all is implement 360-degree reviews as part of their employee review process?  Lake|Flato is thinking of implementing this and would like to talk to a few other firms who have experience they would be willing to share.  Please contact me if you'd be up for a short email discussion or phone call to discuss.  hholdridge@lakeflato.com

... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Can furniture be hazardous? You bet it can…

From flame retardants in foam cushions to unnecessary stain and dirt repellents on upholstery materials, everyday... Read more

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more