Championing the
Changemakers

Wood was the first material used in window frame and sash construction, and it remains popular for homes with its warm feel and relatively high energy efficiency.

BuildingGreen-Approved Windows

Wood windows must achieve an NFRC-certified unit U-factor of 0.22 or lower. Manufacturers also must demonstrate that their highest-... Read more

Is anyone else working on a project doing Living Building Challenge v4.0 Energy Petal? We're working through the Imperative 08 Net Positive Carbon Resiliency Strategy requirements that ask for the project to be habitable for a week in the event of an emergency. We're curious how others are defining "habitable" and what systems assumptions... Read more

Welcome to the quiz portion of Eight Tips for Passing the LEED v4 AP BD+C Exam.

Learning Objectives
Upon completing this course, participants will be able to:


1. List important tables and calculations from the reference guide.
2. Explain what's pertinent about credit options and documentation.
3. Detail... Read more

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking. Please share this with your safety staff if they do not already know. Let's keep everyone safe!

The AIA is NOT announcing the COTE Top Ten award winners this Wednesday.  Both the firm and student juries were held last month and winners were chosen.  But the AIA is focused on COVID-19 info only now, restricting other communications.  That is why the COTE newsletter has disappeared from your mailboxes.

Maybe i am the only one who... Read more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

Remember 2013? LEED version 4 had just been released to the public. Hardly anyone was using it, though—not only because they didn’t have to, but also because there just wasn’t a pathway to achieve many of the new credits in the rating systems. Especially the product-related credits in the Materials & Resources category, along with the Low-... Read more

Hi All,

As you know from the SCL Summit last year, I have been organizing a task group to create a draft of our SCL Contractor Commitment. We have come up with a short Tiered commitment draft as well as some best practices and challenges that led us to the commitment. I encourage everyone to take a look at the draft and please send any... Read more

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

If you haven't seen it yet, today's U.N. report "Making Peace With Nature" tackles climate change, biodiversity loss, and pollution jointly within the framework of the Sustainable Development Goals. 

The analysis is anchored in current economic, social and ecological reality and framed by economics and the 2030 Agenda for Sustainable... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Jake Gehrung
 

Question for you all: there is this wonderful graph showing how we can shift mechanical and electrical dollars into envelope investments to make deep energy savings cost-neutral. Have you experienced this on a project?

1-minute or less survey! (two questions, more detail if you want)

https://docs.google.com/forms/d/e/... Read more

Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more

Our firm was asked by a government client in Canada to update their specifications for concrete to capture low embodied carbon as a performance metric. From the SDL group's knowledge of concrete procurement: