Championing the
Changemakers

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Live webinar approved for 1 AIA LU and 1 GBCI CE hour. Each person intending to earn CEU credits must purchase their own seat.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than... Read more

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

Hello and Happy New Year!

I joined the SAL Peer Network a few months back and I’m really excited to be part of this group, although a bit delayed in my introduction. I’m an architect working as a consultant and managing the Sustainability Department at Entegrity (an energy and sustainability consulting firm) located in Arkansas. I’ve... Read more

This is a test for surveys.

Carpet is comfortable, offers good sound control, and offers great aesthetic options. But it is typically made from petrochemicals, and carpet and its adhesives can offgas VOCs. It is also a challenge to recycle, increasing the chances that it will be incinerated or disposed of in a landfill. Broadloom carpet cannot be readily repaired if... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

Hi all,

The Healthy Building Network, now Habitable, was kind enough to develop printable versions of their Informed Product Guidance for us. I think these are a really great resource for design teams looking to select better product options. While the web version is great, we are using the printable version to hang select sheets around... Read more

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

As Building Green’s Finance Manager, Ashleigh is responsible for the development and analysis of financial strategic plans, operational budgets, and the development and analysis of associated performance indicators.  Additionally, in her day-to-day she oversees all areas of finance including: payroll, accounts payable and receivables, project... Read more

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

The BuildingGreen/GreenStep exam prep materials are... Read more

Have you ever been accused of being "self-righteous," or "judgemental" in your role as and SDL? Anyone have tips and tricks to avoid this trap? 

You know all those times when you want to reply privately to someone, but don't have their email address handy? What a pain, right? 

Not anymore! Now you can go to the "Group Members" tab on the BuildingGreen Communities forum page, and hover over anyone's name to see their email address. 

Only members of the forum can see your... Read more

Hi! I'm writing a short news piece on WELL v2 and looking for someone very familiar with the existing and v2 standards to interview about the changes. If you meet that description and would like to go on the record with your thoughts, please reply to me directly at paula@buildinggreen.com. Thanks!

In looking for ways to reduce jobsite waste and lower our carbon emissions, I'm working on a business plan for centralized procurement, in lieu of individual project purchasing their own tools, PPE, & consumables.  I'm curious as to how many other GC's on here use (or have used) a central purchasing process and if you have any pros/cons... Read more

Hello!

Here's a reminder that our call for this month will be taking place next Tuesday, January 14th at 2:00pm ET.

We hope you'll be able to join us on the call!

Join Zoom Meeting:

https://zoom.us/j/248664490

One tap mobile
+16699006833,,248664490# US (San Jose)
+19292056099,,248664490# US (New... Read more

This report is no longer being sold.

If you have questions, please contact customersupport@buildinggreen.com

Whether you're selecting windows for a 99-unit condo project or for a single-family home, you're making a choice your client will have to live with for years, maybe decades.

And no matter how large or small... Read more

Hello all,

The Bay Area SCL contingent has recently published an anti-idling toolkit so contractors can get empowered to enact their own anti-idling policy on their jobsites. We're all in this together - if you haven't already brought this up with your company management, hopefully this toolkit serves as a good starting point. 

... Read more