Championing the
Changemakers

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Our building scientist has been using Insight 360 to model daylight and document it for LEED certifications.  However, it appears that Autodesk is no longer fully supporting the tool and may eventually stop all together.  (we have not been able to run simulations for weeks due to a change to how "cloud credits" work on their end that they... Read more

Hi all,

I wanted to reach out to fellow MEP energy modeling teams to assess everyone's experience with the new PCI calculation methodology in 2016. It was a substantial change in how we show savings on projects. Big changes can often come with un-intended consequences. I'm all for pushing to higher efficiency - just want to make sure we... Read more

There are a number of SDL and other peer network folks talking about a potential casual meet up in association with Living Future 24 (next week in ATL).

In the interest of Julie McCoy-ing this thing into being ... 

Who: All y'all ... any Peer Network folks who are in town for LF24 (or local to ATL). 

Why: Connecting is... Read more

All - 

We have corporate clients that are starting to request antimicrobials in response to Covid-19. I assume we are not the only ones seeing an increase in these requests. Knowing that the evidence supporting antimicrobials has limited to no efficacy, how are you approaching these conversations? We want to continue to advise based on... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Welcome to the quiz portion of Choosing Windows: Looking Through the Options.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose a frame material based on its structural characteristics, thermal insulation, durability, maintenance requirements, cost, and effects on the... Read more

I am looking for examples of adaptive reuse projects that have addressed current or future flooding by elevating floors from the existing condition.

Hi all,

I see that this was a hot topic for the Winter Retreat this past year, but I am wondering how your firms manage standard materials across your practice. two aspects - standard specification items, and also designer choice materials. 

1. Do you have a spec baseline with high performance materials that you start with for all... Read more

We have a client thats going through a TI remodel in a building thats a LEED Core+Shell certified building. One of the questions we are trying to figure out is are there things we need to be doing to not imperil the building's certification. 

I think the answer is that the landlord had to write tenant guidelines at the time of... Read more

Hi folks,

We’re working on the agenda for what’s shaping up to be a really awesome Summer Summit at a great new venue in Massachusetts. There is an awesome group already registered, and we’d like to fill the remaining slots soon so that we can develop the agenda with your input.

If you’ve been planning to register, please do it... Read more

Https://www.metropolismag.com/architecture/yale-un-environment-eco-living-module/pic/44437/

Many of you will be passing through NYC on your way to the SDL Summit in Garrsion this week. I encourage you to make a pit stop at the United Nations. You’ve heard me talk about the next generation, tech transfer building systems... Read more

Lake|Flato is growing our design performance team!  If you know any great applicants for our new design technologist position, please send them our way:

Design Technologist in San Antonio.pdf (lakeflato.com)

This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

This page contains our full User Agreement.

This Agreement sets forth the terms and conditions for your use of all webpages under both the BuildingGreen and LEEDuser names and domains, published by BuildingGreen, Inc. (collectively, the “Site”), including The BuildingGreen Report (formerly Environmental Building News) and BuildingGreen... Read more

Hi all,

All members of the WA Building Code Council received an email from Tim Attebery of the Washington State AGC and I'm trying to make sense of the role of the AGC and whether it is representing the consensus option of general contractors in Washington or not. The letter is very much against the energy code advancement, which... Read more

There are a variety of products and practices that contribute to environmentally friendly landscaping.

BuildingGreen-Approved Landscaping Products
Edging

BuildingGreen approves products with recycled content or other environmental benefits.

Erosion Protection

Natural-fiber erosion protection options include... Read more