Championing the
Changemakers

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Welcome to the quiz portion of What Makes a Product Green?.

Learning Objectives
Upon completing this course, participants will be able to:


1. List and describe at least three attributes that address each of the following categories: "efficient use of materials"; "responsible sourcing"; "energy and water... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be... Read more

Does anyone have an opinion of Autocase?    https://autocase.com/

I had not heard of this platform before.  Their website says that some firms in the group are customers / users.   Website does not do a great job of describing exactly what they do.  Is there value?

Thanks,

Allen

Hi all - 

I have heard a good deal about SBTI in the last while and am wondering about this group’s firms’ engagement with them. We reported one year through CDP, and it was not very useful. It focused entirely on Scope 1 and 2 emissions, which are over 1000x times less than our semi-controllable Scope 3 (buildings’ embodied carbon and... Read more

The Sustainable Design Leaders peer group brings together the most committed sustainable design directors from leading architecture firms throughout the U.S. and Canada. We invite you to apply for membership.
We look for the... Read more

Green Gurus,

First of all, it was great to see so many of you joining our last month BSA COTE webinar! I hope you enjoyed it.

Coming up next Wednesday at 2pm EDT (11am PDT, 12pm MDT, 1pm CDT), we'll have the inspiring Ashley Rao from Leers Weinzapfel leading the presentation titled INTEGRATED SUSTAINABILITY AT THE JOHN W. OLVER... Read more

Looking for a recommendation for architectural renderings who would be interested in doing some work for a Direct Air Capture project. A friend is working on a project with Deep Sky and I'd love to make a connection to someone(s) affiliated with the network, if possible.

I'm looking for products that have cradle to cradle documentation, as well as EPD's & HPD's and are red list free.  What are your go to websites when you're researching products?

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

Hi all - we have several projects where money from the IRA may be able to get projects farther. I've seen the AIA/USGBC webinar and done some other research as well. Does anyone know if there's a Higher Ed group that is chasing down how and when the money is available and for what exact purposes? Are you planning on using consultants to help... Read more

Hello SD Leaders!

Two weeks ago a group of us gathered for the Winter 2020 Sustainable Design Leaders Summit. Those of us from BuildingGreen that were on site, greatly appreciated everyone's time and energy. It's always a pleasure to work along side you all!

Here is the summit report!

Reminder: We are giving a priority look... Read more

Are you or companies considering joining RE100? http://there100.org/going-100

"Companies joining RE100 make a global, public commitment to 100% renewable electricity.

To achieve this goal, they must match 100% of the electricity used across their global operations with electricity produced from renewable sources – biomass (... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Hi Gurus,

We are having a hard time sourcing a baby changing table that is free of anticmicrobial coatings. KoalaKare, the predominate manufacturer, includes Microban in both their plastic and stainless steel product options.  Does anyone have any experience with a durable, ADA compliant and readily available baby changing table free of... Read more

Hello friends. On a current school project, an abuse resistant wall covering has been proposed as an alternative to our typical MDF wainscot. The proposed product has been used successfully in healthcare, and switching to it will save the project almost $1million, which is no small amount when the project is over budget and 7-figure cost... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more