Championing the
Changemakers

For those that missed Z's subtle mention of this a few weeks ago, Bora finally decided sustainability is important enough to have someone dedicated full-time to it, and then went out and got one of the best:

https://bora.co/bora-hires-sustainability-director-corey-squire/?tax=all-posts

I've been sharing Corey's thoughts on... Read more

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more

Stone was one of humanity’s first building materials and continues to play an important role in today’s green building industry. There are many stones used in the building industry, but the most common ones used for exterior cladding are limestone, granite, marble, slate, and sandstone.

BuildingGreen-Approved Stone and Masonry Cladding... Read more

Zero Tool has an expired certificate and isn't functioning. https://zerotool.org/zerotool/

I've emailed info@architecture2030.org but nothing yet. Anyone have any suggestions for contacting the administrators?

Thanks,

Tiffany Broyles Yost

GBBN

The Sustainable Design Leaders peer group brings together the most committed sustainable design directors from leading architecture firms throughout the U.S. and Canada. We invite you to apply for membership.
We look for the... Read more

HI All,

I am curious if others are using THERM in-house for your envelope design?

We usually use our building envelope/curtain wall consultants (Boston - so mostly RWDI and Heintjes) but our teams are finding that they need the information faster than our consultants can provide, they are backlogged, or we have some curtain wall... Read more

I think they look great - thanks to BuildingGreen for setting this up!  A few comments/questions:

Mass Timber Construction: An Economic Study of Supply, Best Use, and Implementation in three North American regions

This series unveils a macroeconomic study of building with mass timber in three U.S. regions; the Upper Midwest, Rocky Mountain Colorado, and the Southeast. 

Three companies - SCB Architects, LeMessurier, and Turner... Read more

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

We think fresh water supplies are endless, but this idealistic vision is clouded by the smoke of countless forest fires in the U.S. West and elsewhere. Instead of endless bounty, climate change is bringing us catastrophic droughts and flooding that now dominate the headlines and threaten entire regions.

This report covers innovative... Read more

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

Hello friends, Posting this to help out a friend that you all know!

(please reply directly to Kira at her email below) Tx

Dear Gurus, 

I am curating/hosting a panel at CarbonPositive RESET:

DESIGNED FOR CLIMATE: A New Construction Showcase

North & South America: September 8, 2020 | 4:45-5:25pm (PST)

What a great first day!

Here are the slides from the show and tell presentations last night at SOM's office; everyone who presented with slides has given approval to share them.

I was asked to share this with my network...

"For colleagues working with LCA data, during design, construction, or facility management proces, please help us understand how EPDs are useful in your processes by completing the survey below:"

https://www.linkedin.com/posts/ashrant-aryal-2354497a_qualtrics-survey-q...

Hello all,

Does anybody know of a substitute for Ecotect's solar tool? I use it to very quickly test shade options and I love how I can easily test horizontal and vertical elements, tilting and rotating them. I can have a window with the façade on one side and the sun path with the shadow mask on the other side. It is easy to use and... Read more

Welcome to the quiz portion of Making Your Own Electricity: Onsite Photovoltaic Systems.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the difference between crystalline and thin-film photovoltaic technologies, and the uses of each.
2. Describe the ways in which PV... Read more

THIS WEBINAR REGISTRATION IS CLOSED.

Wondering how LEED v5 development is progressing? Here’s your chance to find out from two of the folks who’ve been closest to the process. Join us for this 45-minute event on July 26 at 11:30 Eastern (8:30 Pacific) .

LEEDuser hosted... Read more

Hi All,

USGBC MA is doing a study on the cost of net zero energy buildings in MA.  I’m wondering if you all have any data to share on plug loads in ZNE projects. I’m looking for single family res, 2-4 unit residential, +/- 60 unit residential, 10-12 story office, and k-12.  The engineers have presented initial results and their... Read more