Championing the
Changemakers

We think fresh water supplies are endless, but this idealistic vision is clouded by the smoke of countless forest fires in the U.S. West and elsewhere. Instead of endless bounty, climate change is bringing us catastrophic droughts and flooding that now dominate the headlines and threaten entire regions.

This report covers innovative... Read more

Mark your calendars Sustainable MEP Leaders!!
Here are the details to save the date for the 2020 MEP Summit:

Date: June 9th and 10th, 2020
Location: Stantec Office in Denver, CO
Schedule Outline: Tues. 9th beginning with Lunch at Noon, ending Wed. about 3pm

Gather and learn from your peers! Share your challenges... Read more

Currently, the BIT User site is fully accessible without having to log in (unless you want to edit or add content, of course). The time has come, however, to start restricting access only to logged-in users.

Which sections will be freely visible, and which will be visible only to registered users? Here's what I recall from our earlier... Read more

Does anyone have a recommendation for software that helps organize and track product and material selections for projects? 

Thanks!

Discarded tires are an environmental disaster, and finding a beneficial use for them is a high priority.

BuildingGreen does not approve any flooring product that is made with tire-derived rubber, though some products may be appropriate for exterior use.

A couple questions for this group. I know we're having a Green Commons meeting on this next week. But can anyone comment on the following questions?

-Have you or your firm split the benefit of the 179D with a client? Is this typical?

-Is prevailing wage a requirement for all 179D benefit, or does it follow the same lines as... Read more

Welcome to the quiz portion of Climate Analysis for Architects (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Access climate data.
2. Choose appropriate design energy simulation tools.
3. Know when and how to run analyses with projected weather data... Read more

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more

Just highlighting a tool from Circular Ecology (the group that brings you the Inventory of Carbon and Energy data) for measuring Scope 1 and 2

https://circularecology.com/organisational-carbon-footprint-tool.html

Hi! We're putting together a pre-summit survey to collect input from everyone who's signed up for the Summit; we'll use that to prep the agenda for our get-together July 9-10.

Based on our last few phone calls, here's a list of topics on our radar. If there are others you'd like to see added to the survey, or if you have more thoughts... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Was anyone else surprised to see ASHRAE 228-2023 using eGRID Subregions for both the Regional Electricity Source Energy Conversion Factor and Regional Electricity Greenhouse Gas Emission Factors? In the past I have used eGRID sub-regions but also State and local utility conversion factors depending on what energy or operational carbon story I... Read more

SDL Group -

Hi all!  After a brief hiatus from the group to move from New Orleans to Portland (OR), start a new job at ZGF Architects, buy a house, and  see my baby boy become a toddler (all in the past year!)---- I'm ready to plug back into the group.  Seeing folks at the ILFI conference re-energized me to reengage :)

So…..does... Read more

Hi All,

I wanted to share a program of superstars including many of you.  I look forward to electronically connecting and learning together.

Every Monday from June through August, the Boston Society for Architecture (BSA) and the Carbon Leadership Forum (CLF) Boston Hub will present Embodied Carbon 101, a 12-part program series in... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more