Championing the
Changemakers

Welcome to the quiz portion of "The Potential of Prefab: How Modular Construction Can Be Green"!

Learning Objectives
Upon completing this course, participants will be able to:


Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

As part of the Philadelphia AIA COTE, we have been proposing implementing sustainability in some fashion into the design awards with our chapter's design committee.  I know that many of you have been down this road before, and wanted to get your feedback at a high level about what your local COTE is doing.  Anyone who's interested, can you... Read more

Congratulations to Mara Baum (HOK) and Alison Kwok (U of Oregon), FAIA! 

AIA announcement

Hi Green Gurus, 

I am happy to join this group, and would like to share a short introduction of myself. I’m Jais, and I am with FXCollaborative as a Sustainability Design Specialist working with Ilana Judah. I have been here little over a month and am enjoying it so much! 

I have studied architectural design focused on... Read more

Welcome to the quiz portion of How to Make Integrated Project Delivery Work for Your Project.

Learning Objectives
Upon completing this course, participants will be able to:


1. State three problems that Integrated Project Delivery (IPD) promises to solve.
2. Dispel four misconceptions about IPD that have... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Hello Everyone,

As the staff here at BuildingGreen prepares for our third peer network summit in two months, we'd like to share out the Summit Report from the first online summit with the Sustainable MEP Leaders. We're a little delayed in sharing this with the wider Green Gurus group, but there is still plenty of time to review before... Read more

Since attending the SDL Summer Summit this year, I've continued soul-searching for more actionable firm-wide, walk-the-talk Climate Initiatives to push forward and sheepishly realized that our office operational emission accounting (and potential offsets) has literally fell off the radar. Since 2008.
:(

So my query:
1. Are... Read more

Avoiding Toxic Chemicals in Commercial Building Projects

We’re excited to issue our special report, Spec This, Not That.

In updating the report in 2020, we engaged a respected toxicology and regulatory-compliance firm to review and assist in our revision of the entire publication. This edition reflects the latest science in... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Hi, folks! 

I was recently asked if BuildingGreen could connect prospective speakers to an event organizer in Chicago. Beyond the leaders in the BuildingGreen networks relayed, I wanted to share that the exercise led me to the Women and Climate speaker database: https://www.womenandclimate.co/speaker-database 

When filtering by... Read more

Wall and corner guards increase durability, but these products are typically made of PVC.

BuildingGreen-Approved Guards

BuildingGreen approves products that avoid the use of PVC and are made with recycled content, FSC-certified wood, other biobased materials, or less-problematic plastics. 

Health and Environmental... Read more

SDLers – For one of our projects we are working with local tribes to procure timber. We would also like to get FSC certification, but haven’t found significant overlap between these two criteria in the Pacific Northwest. There appear to be two certification entities in our area: Northwest Natural Resource Group and Trout Mountain Forestry.  I’m... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi all-

We are dabbling in developing an official research component of our firm. We have collaborated with a class at a local university and are looking for ways to take our research to a higher level. I'm curious how some of the other firms doing design or building technology research approach the process. For instance, do you have a... Read more