Championing the
Changemakers

Charlotte has been the lead customer service representative at BuildingGreen for 25 years. 

Having been involved in the nuts and bolts of customer service and accounting throughout various phases of the company’s development, Charlotte’s historical knowledge is immensely helpful to BuildingGreen’s staff and customers. Customers know her... Read more

Hi All,

Polling the group to see if anyone has experience with Simergy - an e+ based modeling tool?

The tool appears to have features and integration with a lot of e+ plugins that make it attractive - but i haven't heard of its widespread use.

Is anyone successfully using Simergy?

I am looking for a Mechanical Engineering firm in New York state who works in mid-sized commercial (ideally hospitality or multifamily experience) and who has experience with geothermal GSHP systems.

I was asked to share this with my network...

"For colleagues working with LCA data, during design, construction, or facility management proces, please help us understand how EPDs are useful in your processes by completing the survey below:"

https://www.linkedin.com/posts/ashrant-aryal-2354497a_qualtrics-survey-q...

Https://www.metropolismag.com/architecture/yale-un-environment-eco-living-module/pic/44437/

Many of you will be passing through NYC on your way to the SDL Summit in Garrsion this week. I encourage you to make a pit stop at the United Nations. You’ve heard me talk about the next generation, tech transfer building systems... Read more

Hi Everyone! 

I am building our internal/firm resources around sustainable design, and creating our post-occupancy evaluations is one of those resources. Does anyone have references or resources they'd recommend me to look into for post-occupancy evaluations? So far I am considering a few evalutation types: building user input, building... Read more

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more

Hi all, 

Thank you again to those of you who attended the Spring 2024 SCL Summit! We had an amazing day of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all of the... Read more

Hi all,

Just like many of you, our firm is dedicated to increasing representation in the professions and through its relationship to the AIA Large Firm Round Table was able to access a National Organization of Minority Architects Fellow this summer. We’re loving our work with Himesh thus far, but it’s unclear whether we have the workload... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

Thank you for joining us for this webcast! Please complete the following survey to provide us with feedback and to record the information we need to report your CEUs.

By providing the information in this survey you will enable us to automatically report these CEUs to the appropriate organizations. Everyone attending and seeking CEUs must... Read more

I have been asked to recommend folks to join the AIA’s Framework for Design Excellence.  The AIA Framework for Design Excellence is basically the top ten toolkit, that has been rebranded by the AIA and is forming the backbone of much of the policy that the AIA is currently setting.

From the AIA's website:

Five types of green buildings explained. Check out this great infographic by the Pembina Institute: What do net-zero and zero-carbon buildings mean for energy use and climate pollution?

Good morning. If you're worried  like I am by today's new IPCC Report and would like some helpful explanation I recommend reading climate scientist Zeke Hausfather's lengthy Twitter feed summarizing key aspects with graphics. It's here https://twitter.com/hausfath/status/1424642708291821569?s=21

of course we need to see this as an even... Read more