Championing the
Changemakers

Welcome to the quiz portion of Why Schools Are Embracing Net-Zero Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Recount why schools are at the forefront of the net-zero energy building trend.

Describe the financial arguments that have led school boards to accept net-zero... Read more

Hello,

This is not my area of expertise but our contactor has suggested central heat pump hot water (CHPHW) is $1m more expensive than gas fired domestic hot water for a 150 unit multi-family residential building in Massachusetts. The Building Decarbonization Practice Guide is extremely helpful but, from their comments, it is all coming... Read more

Hi,

Has anyone been asked by a client to track welding rods on any projects? We were recently asked to do this. I was asked why the client would ask us to do this. I don't know if it has to do w/ "real property" and is a property tax-related reason, or if it is an environmental/sustainable reason. There is piping associated with the... Read more

Kristen Fritsch, in the thread about ipe wood, asked about resources comparing the carbon footprint of transporting building materials vs the transport mode.  There are people who spend their lives on this topic that I won't presume to speak for, but I'll share a few observations:

Even though freight transport is something like 7% of... Read more

Does anyone have a draft copy of the ASHRAE 209P standard? It has not been finalized? See an overview of it here from IBPSA 2016 summer meeting.

The 209 committee plans to release it for a 3rd public review and hopes to finalize it in late winter or early spring. I'm just trying to track down one of the earlier verisons of the document... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Indoor pollutants can cause health problems and disrupt HVAC system functioning.

BuildingGreen-Approved Filtration

BuildingGreen approves a variety of equipment, filters, and pre-filters that remove particulates and contaminants, minimize pressure drop, or reduce pollution from operations. Products include:

Hello SCL,

We are getting back to our usual schedule of a pre-Greenbuild SCL Summit. We will be opening registration and announcing topics shortly. In the meantime, please pencil us into your calendar.

Date: September 25, 2023

Location: ZGF Architecture 600 14th St NW #800, Washington, DC 20005

Time: Soft start at... Read more

The current Stantec/BuildingGreen featured topic is Resilient Design. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Material Health featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Hi all,

I've been working on a LEED project in California for months and our energy modeler wants to use the LI 10480 Title 24 2019 pipeline to demonstrate compliance under LEEDv4. Only problem is, I've never done it that way before, and our modeler and I are consistently speaking in different languages. Anyone done a project under this... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

Greetings, SDL network - We are attempting to resolve an issue with how data center projects calculate baseline EUIs for the AIA 2030 Commitment and could use some help from this network. With projects that comply with code prescriptively (i.e. not energy modeled), we have found the default baseline assumptions within the DDx platform are not... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

The Sustainable Community Design Leaders Peer Network brings together planners, architects, landscape architects, and allied leaders who are committed to leveraging the... Read more

I took a first pass at content for the Energy Audit best practice, see the uploaded file. 

Dear SD Leaders,

A friend is looking for a High Performance and Sustainability Leader to join their mid-size architecture company in New York.

If you know anyone that could be interested in this position could you please kindly send them my way?

Thank you

Marzia