Championing the
Changemakers

Welcome to the quiz portion of LEDs: The Future is Here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate the energy efficiency and long service life of LEDs.
2. Describe basic LED components and how, when assembled, they perform differently than traditional light... Read more

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate

Hi SDL Group - 

Our firm has been presented with a potential opportunity to share with USGBC National Representatives details about a few of our voiced concerns in the context of specific project administration efforts.

For us, these relate to two specific factors:

Hi everyone,

Since I know we have a lot of talented people in this group, I'd like to reach out to those of you based in Los Angeles and see if anyone is interested in talking at an upcoming Living Building Challenge collaborative event.  The topic of the meeting is "Selecting Healthy Materials 101: From the perspectives of... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

Thanks to those of you who signed up to share your (other) talents!!!

If you are seeing this for the first time, check out the link below to see your peers performing and if you have a talent you'd like to share (music, movement, spoken word, comedy, cooking...whatever!) send me an email (bb@sustainable-performance.org) and we'll follow... Read more

Returning to work: for many, it’s unthinkable without some kind of reassurance that leadership and the facilities team have taken all possible precautions. Lots of organizations are weighing in on what we should pay attention to, but how do we know if it’s working?

The free Re-entry program from Arc is a tracking and measurement... Read more

Most products sold as “ceramic tile” are fired at lower temperatures and are less durable.

For porcelain tile, BuildingGreen starts with the Green2 standard for sustainable tiling—ANSI A138.1 American National Standard Specifications for Sustainable Ceramic Tiles, Glass Tiles, and Tile Installation Materials. This is a multi-attribute... Read more

Hi all - I've heard from a few of you that you are interested in doing a book club or other internal education based on the Path to Zero Carbon. If you would like the word docs or pdfs of each of the 16 posts, let me konw and I'll send them to you.

I'd also like to know of those who are using it how it's going and what you're finding... Read more

So I was testing assigning a BIT Expert to a Best Practice and I am having trouble getting the profile image to appear.  

When I upload a profile picture, it appears on the standard profile page from "My Account" but when I navigate to the BIT Best Practice 01, the image does not show and it takes me to another profile page that does... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

I am looking for case studies/trying to identify buildings using concrete mixes with upwards of 30% replacement of cement by SCMs.  I've been in conversations with some structural engineers who are interested in lowering embodied carbon in upcoming projects, but would like to see examples of where this level of replacement has been successfully... Read more

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

The Sustainable Design Leaders peer group brings together the most committed sustainable design directors from leading architecture firms throughout the U.S. and Canada. We invite you to apply for membership.
We look for the... Read more

Hello everyone!

I'll be using this thread to post call reminders and notes.

To start us off, the next call is this coming Tuesday, March 24th at 1pm Eastern.

The topics we will be discussing include:

Around the “room” quick check-in. How’s everyone doing? What’s top of mind for you? Able to keep projects and... Read more

Hello Green Gurus!

We have some exciting details for the next All Peer Networks webinar on Design Agency & Civic Engagement: Building Sustainable Communities.

REGISTER HERE - Hope to see you there!

Design Agency & Civic Engagement: Building Sustainable Communities
June 25th, 2020
3pm - 4pm ET (Noon - 1pm... Read more