Championing the
Changemakers

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hello SCL peeps, 

Thank you to all the people who filled out our 2021 event survey. Your feedback did help us narrow down the options, but it was still inconclusive about whether there’s enough interest in doing an SCL-only Summit. 

To stay on schedule with our planning (and to make sure the event will pencil out financially), we... Read more

We think fresh water supplies are endless, but this idealistic vision is clouded by the smoke of countless forest fires in the U.S. West and elsewhere. Instead of endless bounty, climate change is bringing us catastrophic droughts and flooding that now dominate the headlines and threaten entire regions.

This report covers innovative... Read more

THIS WEBINAR REGISTRATION IS CLOSED.

Wondering how LEED v5 development is progressing? Here’s your chance to find out from two of the folks who’ve been closest to the process. Join us for this 45-minute event on July 26 at 11:30 Eastern (8:30 Pacific) .

LEEDuser hosted... Read more

Hi all,

I wanted to reach out to fellow MEP energy modeling teams to assess everyone's experience with the new PCI calculation methodology in 2016. It was a substantial change in how we show savings on projects. Big changes can often come with un-intended consequences. I'm all for pushing to higher efficiency - just want to make sure we... Read more

I've been hearing recommendations for bipolar ionization, as a way to filter airborne virus particles in HVAC systems while avoiding the energy penalty of increased ventilation. However, I've also heard that ionizing equipment is dangerous because it produces ozone.

Does anyone have any insight into the effectiveness and/or cautions... Read more

Our building scientist has been using Insight 360 to model daylight and document it for LEED certifications.  However, it appears that Autodesk is no longer fully supporting the tool and may eventually stop all together.  (we have not been able to run simulations for weeks due to a change to how "cloud credits" work on their end that they... Read more

Hi all,

I see that this was a hot topic for the Winter Retreat this past year, but I am wondering how your firms manage standard materials across your practice. two aspects - standard specification items, and also designer choice materials. 

1. Do you have a spec baseline with high performance materials that you start with for all... Read more

Hi folks,

It's here! Highlights, key takeaways, and pics from our packed few days together in Ashland, Mass. in the 2023 Summer Summit report.

From the intro:

Effectively meeting the challenge of the moment is what the world needs from us. Being grounded and energized by connections and sharing with our peers in a safe... Read more

Dear Gurus,

At Greenbuild this year I'll be discussing how statistics can lie (in the context of green building claims).  I'm collecting examples of this to prepare.  If any of you know of examples, please send them to me! 

Here are a few of the fun ways statistics might lie that I would be looking for: biased or too-small sample... Read more

Welcome to the quiz portion of Climate Analysis for Architects (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Access climate data.
2. Choose appropriate design energy simulation tools.
3. Know when and how to run analyses with projected weather data... Read more

I am looking for examples of adaptive reuse projects that have addressed current or future flooding by elevating floors from the existing condition.

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

Would anyone have an example LEED Homes v4 specification they would be willing to share?  We are working on our first LEED Homes project, a midrise low income housing development here in Houston.  We have a LEED Homes provider, but she will not provide the specifications, which seem to be quite different in requirements and submittals from our... Read more

Hey Team,

I'm in a Living Future session where a number of manufacturers are talking about the low uptake they're seeing in their take back programs. Contractor friends... What barriers (if any) are you running into in using take back programs? How might we as architects help increase utilization of these programs?

Aley

Built Environment Plus (was USGBC MA- aka Meredith Elbaum's band) has organized this awesome sustainability scavenger hunt.

It's fun. It's easy. Anyone can participate from anywhere - it's all app based, and it's a great way to get energized for Earth Day or week! And it's for a good cause, a fundraiser for supportive organization. Have... Read more