Championing the
Changemakers

Hi folks,

Our next private webinar is coming right up:

Fusion of Design + Performance: How Payette Was Recognized As AIA Firm of the Year

Tuesday, February 12, 1:00 pm EST

Payette is the first AIA Firm Award recipient to have been nominated jointly by the Committee on Design and Committee on the Environment. Z Smith... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

Water and electrical metering and submetering equipment provide valuable diagnostic information and verification of building energy and water usage.

Measuring Water Use

The Alliance for Water Efficiency recommends metering all new connections, retrofitting meters onto existing unmetered connections, and submetering all new... Read more

Hi SDL: I'm working on a presentation and would love to highlight a completed and/or unbuilt project that seriously incorporates climate change projections in the design. Any scale would be great. It's becoming abundantly clear that we need to be doing this for any building that will be around for even a few decades. In fact, the insurance... Read more

The IECC is accepting applications for committee members for its development of the 2024 International Energy Conservation Code (IECC). The responsibilities of the committees include:

Hello friends,

We are looking for recommendations for solar photovoltaic consultants to support one of our projects. We have used SEI in the past, but would like to develop a deeper bench and approach it from another angle. We aren’t too concerned about the consultant’s location, but are looking for someone that is on top of the current... Read more

Welcome to the quiz portion of The Product Transparency Movement: Peeking Behind the Corporate Veil.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe an EPD, naming at least six characteristics that it attempts to quantify.
2. Explain what the HPD Open Standard... Read more

Jerelyn Wilson’s work with BuildingGreen started in 1985 as an owner and member of the Board of Directors. Since then, her evolving roles have included HR Director, Outreach Director, and currently CEO. She is responsible for working with mid-sized to large architecture firms to implement sustainability education, as well as professional... Read more

Dear SDL,

After almost 12 years at Sasaki, I have finally decided to leave for a path slightly-less-traveled. My own development project in Boston (passive house, ZNE condos) is in construction and I will be focusing my attention on that over the course of this year, and then hoping to continue doing similar integrated... Read more

Gather with the Changemakers in Sustainable Design

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll explore what Sustainability Leadership looks like in 2023 and... Read more

Hello SCL members,

A gaping hole has been left since Patty Lloyd stepped down from our SCL steering committee. Don't worry, she is still in the network and tirelessly championing SCL. But this means we are opening up nominations for at least one leadership spot. If you are interested, please email me directly (candace@buildinggreen.com)... Read more

Hello Fellow Green Guru Members:  I am pleased to be a new member of the Sustainable Community Design Leaders (SCDL) forum, and look forward to learning and contributing here.  Also, in case you missed it, this week there were two important steps forward towards an eventual standardized Environmental-Social-Governance (ESG) reporting system... Read more

Welcome to the quiz portion of Introducing Fitwel v2.1!

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the purpose of the Fitwel standard, including how it advances the goals of health and well-being of building occupants—as well as public health.

2. List nine ways in... Read more

Hi MEP Leaders,

I wanted to remind you that our monthly call is today, August 10th, at 2pm ET! This was rescheduled from the usual time - the second Tuesday of the month - due to a BuildingGreen staff retreat. If you usually can't make the Tuesday time, this is a great opportunity to join the call!

Here is the agenda, and below is... Read more

All,

For those who tuned into the Green Gurus presentation earlier this week, there was a question that came up during my presentation on NZE/NZC programs regarding whether ILFI allows the offsite renewable energy exception for LBC and Energy Petal projects (as opposed to NZE or NZC). I just double checked with them and it turns out they... Read more

For those who work for companies that track and offset their carbon each year, how do you do it? Looking for best practices and how you vetted where to send your money. Don't need insight on quantifying carbon footprint, just offsetting.  Thanks!

Some of us SDLers saw a need to create an online repository for the best simulation graphics and created IBPSA Project Stasio over the last couple of years. Along side graphics is a list of simulation questions (in progress) that we as architects may not know we could ask. The graphics are linked to answer the questions so our simulation... Read more

Rotary Uninterruptible Power Units

Power interruptions and brief changes in voltage can damage electrical equipment, compromise computer data, shut down manufacturing, and endanger hospital patients. In the case of power outages, generators usually take over, but about 98% of all interruptions last less than ten seconds, and there is a... Read more

We are looking into different building skin materials from including GFRC and FRP (amongst others) as alternatives to precast. I remember years ago (when I was at LAS) we had retrofitted a Federal Courthouse with FRP for blast resistance. I kind of remember that at the time it had some pretty high offgassing concerns. I haven't been able to... Read more