Championing the
Changemakers

Hi there Hive Mind! Hope everyone's doing well and staying cool in the heatwave all over.

An engineer on one of my projects reached out about contact switches for operable windows that are empowered to shut down the associated FCU in dormitory bedrooms when the window is open. This functionality allows the FCU to run at something like... Read more

Thank you for your interest in BuildingGreen

You will hear back from our customer support team in the next 24-48 hours.

Continue to home page »

I just saw this post from Conor on LinkedIn.

Starting in January 2019, all new Columbia Construction Company projects require LED temp lighting.

Are others doing this too? Frankly, given all the benefits and how quickly the industry is matured, it's hard for me to understand why anyone would use anything other than LEDs on a job.... Read more

Hi All,

The National Architectural Accrediting Board is currently undergoing review and revision of its “Conditions for Accreditation and Procedures for Accreditation.”

I recently attended the 2019 Reynolds Symposium: Education by Design, hosted by the University of Oregon in Portland. At the Symposium, a group of 100... Read more

Greetings Gurus, following the AIA COTE Design for Economy concept, does anyone have a resource for a list of building efficiency ratio "targets" by space type? I've always struggled with this initiative. 

I'm hoping for some help answering the question of whether buildings/communities should pursue net-zero energy on site versus investing in new renewable energy (i.e. through the electric utility) that can be built at a more efficient scale elsewhere in the state. Our utility is asking us this question as we are working through how to get the... Read more

Welcome to the quiz portion of LEDs: The Future is Here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate the energy efficiency and long service life of LEDs.
2. Describe basic LED components and how, when assembled, they perform differently than traditional light... Read more

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

Has anyone pursued the schools Mold Prevention IEQc10 successfully and have format for the documentation created they would be comfortable sharing? Our contractor is excited about pursuing this credit but no on our team has pursued it before.

thanks in advance!

I'm looking to compare using an electric tower crane vs a diesel generated tower crane.  I've got the average gallons/hour for the size of crane I'm looking at, but when I reached out to the crane manufacturers, they can only tell me what size electric supply I need to provide, not the kWh usage for the cranes.  I know that it varies depending... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

A site license allows your entire organization to access and share the guide, and to keep a copy in your library.  

We’re excited to be releasing the 2020 edition of Spec This, Not That. 

... Read more

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

Huge shout out to Patty Lloyd, Luke Leung, Janet Olsen, and Sarah Gudeman for their webinar on the Power of Peer Networks. They share lots of insights into the value of participating in BG Peer Networks and many others. Ten bucks to Illinois Green gets you access to the recording--I loved it. What would you have said that they didn't?