Championing the
Changemakers

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon... Read more

Split systems are multi-component units that use an outdoor condenser along with separate indoor fan coils to move refrigerant—and provide heating and cooling—in buildings without the need for ducts.

BuildingGreen-Approved Systems

BuildingGreen approves mini-splits that are tested to AHRI standards and have minimum SEER and an... Read more

Hi all, 

The San Francisco Department of the Environment is hoping to gather info from designers and specifiers about construction surplus materials. Their survey is 8 questions total and not limited to those in the SF area. 

Pasting info below if you have a chance to participate! 

Calling Designers and Specifiers:

... Read more

Hi! Just saw this White House press release stating that federal suppliers will need to report on scope 1 & 2, and relevant scope 3 emissions and climate-related financial risks as well as set science-based emission reduction targets. The cutoff for disclosure requirements is $50m in federal contracts. Curious whether this affects any... Read more

Want to make sure those in Portland are aware of a couple of LF18 Ramp-Up Events happening on April 10th. 

Introduction to the Living Building Challenge (presented by Kathleen Smith)
https://living-future.org/events/introduction-to-the-living-building-challenge/

Incentivizing Living Buildings in Portland 
https://... Read more

Welcome to the quiz portion of Net-Zero Energy Isn’t the Real Goal: 8 Reasons Why!

Learning Objectives
Upon completing this course, participants will be able to:


All,

A bit of a short notice, but the Tally team is hosting a webinar tomorrow (1/16) from 1-1:30 EST on the Tally to EC3 integration. It's an incredibly powerful workflow for generating real reductions in embodied carbon and has us pretty excited. We expect a lively group of attendees and will be answering any questions from the... Read more

Hi folks,

Our next private webinar is coming right up:

Fusion of Design + Performance: How Payette Was Recognized As AIA Firm of the Year

Tuesday, February 12, 1:00 pm EST

Payette is the first AIA Firm Award recipient to have been nominated jointly by the Committee on Design and Committee on the Environment. Z Smith... Read more

Welcome to the quiz portion of Green Design: What's Love Got to Do with It?

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize how designers are better able to fulfill the full promise of sustainability by embracing sensory experience.
2. Broaden the sustainable design... Read more

Hello all,

I have a quick question for you. While Energy Star appliances are a no-brainer for projects, I don't see a hard requirement to select Energy Star appliances in the energy prereq/credit. There are references in the water section for water using appliances like ice machines, dishwashers, clothes washers, etc., but no related... Read more

Dear SDL'ers

After many months of soul searching about my role as a sustainability leader and how to have the most positive environmental impact, I have decided to take a leave from practice to pursue further studies this September. I will be undertaking a two year Master’s degree at the Institute for Resources, Environment and... Read more

Here’s a nice NYTimes op ed on urban density that directly addresses the concern Gwen raised on out call today: 

https://www.nytimes.com/2020/03/24/upshot/coronavirus-urban-density-risks.html?referringSource=articleShare

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more

Hi all,

Thanks for your patience as we've finally compressed this video file enough to upload it onto the forum. You can watch the recording of "Are We There Yet? A Sampling and Exploration of Project Process Diagrams" here.

Enjoy!

-Amanda & the BuildingGreen team

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more

As the Communications Associate, Petra works closely with both the marketing and editorial teams at BuildingGreen. Whether it is creating posts on Instagram, analyzing metrics, editing feature articles or writing news briefs.

Petra has a background in journalism, digital marketing and social media. She has a BA in journalism and media... Read more

Hi MEP Leaders,

I wanted to remind you that our monthly call is today, August 10th, at 2pm ET! This was rescheduled from the usual time - the second Tuesday of the month - due to a BuildingGreen staff retreat. If you usually can't make the Tuesday time, this is a great opportunity to join the call!

Here is the agenda, and below is... Read more