Championing the
Changemakers

D.J. Greenspecher

They do, seriously.  They are fine people with tons of information, and without them, all of us Architects would be, well, out of luck.

So, we first want to say THANK YOU to all of our contractor friends who took part in our Contractor Coffee Talk on Tuesday. THAT WAS AWESOME!

We learned things like:

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

I wanted to let you all know about this Built Environment Plus Roundtable coming up on Thursday afternoon 3:00 est. We will be having a discussion around the IRA and how to implement the incentives on projects and help our clients understnad what it means for them. This is an informal setting where people can ask questions or share experiences... Read more

We are looking at installing an aerobic biodigester in a commercial kitchen for an office client that is VERY concerned about zero waste.  Basically, this system takes food waste, treats it with micro-organisms to remove organic matter, and turns it into water of high enough quality to go straight to the sewer.  The manufacturer we are looking... Read more

Love the profile of Anica as the "featured member" on AIA's website--congratulations, Anica!

It's great to see the "just do it" attitude to achieving the 2030 goals: "We do not rely on clients to tell us to design a high-performance building; we are going to do it anyway, it's our job."

We have an increasing number of projects, where the client is coming to us with "net zero" aspirations and plans, some of which don't fit the typical all-electric, grid-tied building that produces 100%+ of its annual energy use on-site.  There include examples like:

1) A (targetd) living building that maximizes on-site production, with... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon... Read more

We are excited to share the REPORT from the 2019 Small Firm SDL Summit held in Las Vegas on June 5th. Take a look and use this forum to post questions and comments that will allow us to engage our new members as we continue the valuable conversations begun at the Summit. As you will read in the introduction, we know that collectively small... Read more

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more

Welcome to the quiz portion of An Advocate’s Guide to Resilience Regulations!

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how U.S. municipalities are using codes to improve the resilience of the built environment in the face of worsening climate change.

2. Delineate five... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Using energy for cooling during peak hours places a large demand on utilities, is expensive, and can be less efficient than off-peak energy production.

BuildingGreen-Approved Thermal Energy Storage

BuildingGreen lists a variety of  thermal energy storage systems.

About

Off-peak cooling, or thermal energy storage (TES... Read more

Welcome to the quiz portion of Why Schools Are Embracing Net-Zero Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Recount why schools are at the forefront of the net-zero energy building trend.

Describe the financial arguments that have led school boards to accept net-zero... Read more

Hi All,
We have a date and time for the next SCL Carbon Working Group Meeting, "see" you there:

Topic: SCL Carbon Working Group Mtg #2
Time: Mar 31, 2020 09:00 AM Pacific Time (US and Canada)

Join Zoom Meeting
https://sellen.zoom.us/j/595221970

Meeting ID: 595 221 970

Dial in info:
        +1... Read more

The Path to Zero Carbon is a series of rigorous, deeply researched white papers produced by Kjell Anderson and others at LMN Architects in collaboration with subject matter experts from across the industry--including some of you! Architecture 2030 is exploring capacity and funding needs to host and convene experts to regularly update the series... Read more

Hi Green Gurus,

A "fun" take-away from the sustainable MEP Leaders Summit (just ended today):

Inspired by Passive House, we are embarking on a campaign: "Low Load Buildings Are SEXY".

One idea we have is:  what if the AIA design awards set limits on metrics like heating loads to meet basic eligibility?

If you have... Read more

Hi All,

Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.

Thanks for any and all experiences!
Misha