Championing the
Changemakers

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

Hi all - at the suggestion of Nadav and some of the Sustainable MEP Leaders, I'm reposting a thread I started a couple days ago in the SMEP forum.

In response to increasingly aggressive (and effective) targeting of building owners (particularly schools), a group of researchers have put their support behind a letter warning against the... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Curious on stories when IAQ testing for LEED or WELL didn't come back with "all clear, everything's good" results we all hope for. 

I have a project right now where we are tracking down suspicious sources and look forward to telling the full story when it's done being written. 

Thought maybe this would be a good safe space to talk... Read more

Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

SDL

Glad to see some of you at the COTE event at our studio last week.

Has anybody heard of this company and technology? https://www.enverid.com

Thanks in advance, Zach

Zach Craun, WELL AP, LEED GA

Associate

COOKFOX ARCHITECTS, DPC

250 West 57th Street

New York, NY 10107

... Read more

Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

Hi friends, 

Before i forget, here is the checklist I mentioned yesterday that got such a positive response in our office - again it came about after i was asked (for the Nth time) to write a sustainability description for a concept proposal/ RFP that I was not a part of and frankly didn't have a lot going for it. So it's framed as "you... Read more

Hello Green Gurus,

Here are all the details about our two Peer Network events in Chicago on Tuesday, June 21st. If you'll be in town, we hope to see you!

From 1-5pm we'll have the Chicago/Midwest Region Mini-Summit, open to members of any of the five Peer Networks (Sustainability Consultants, Community Design Leaders, Contractors... Read more

Hi folks,

I’m sorry to be so last minute with this. LEED v5’s second public comment period ends TOMORROW (Monday, Oct 28). As it currently stands, LEED has eliminated its preferential support for FSC over other forest certification programs and is silent on climate-smart forestry.

I’m hoping that the Climate Smart folks in this... Read more

Guiding questions:

Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

Welcome to the quiz portion of Whole-Building LCA Tools for LEED v4 and v4.1.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the basic goals of whole-building life-cycle assessment, including how it can improve environmental performance and contribute to credit achievement in... Read more