Championing the
Changemakers

Hi folks,

BSR/ASHRAE/ICC Standard 240P, Quantification of Life Cycle Greenhouse Gas Emissions in Buildings, is out for Public Review until March 18. It covers what construction activities have to be tracked and reported and provides placeholder values to use during design. If you have input or suggestions on what would be needed to make... Read more

Hello All,

Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more

P. U. L. Antelo, M.A.

Hi SDL: I'm working on a presentation and would love to highlight a completed and/or unbuilt project that seriously incorporates climate change projections in the design. Any scale would be great. It's becoming abundantly clear that we need to be doing this for any building that will be around for even a few decades. In fact, the insurance... Read more

In the Passive House session at the Winter Summit, I spoke about a Massachusetts DOER report that found that meeting the new energy code in MA (passive house or better in most cases) is cheaper for some building types than traditional construction. Some of you asked to see the report. It was a power point show. On page 34 of this slide deck... Read more

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works to increase the energy efficiency and environmental sustainability of buildings; 
2. Explain why certain materials make more sense than... Read more

Big news! It’s being announced today that the amazing Lindsay Baker will be ILFI’s new CEO—she’s starting the job next week.

Lindsay is talking about bringing a new focus on advocacy work to ILFI—she had been working on setting up a new organization for that purpose when ILFI recruited her. And she’ll have her hands full figuring out... Read more

Hi All,

I try to respect this forum and limit sharing events to the ones that are extra exciting and this is one of them. Coming up on May 20th 4-6pm,  Built Environment Plus (formerly USGBC MA) is launching our Building Tech Forum v2.0 Series.  Here's the link to register: https://builtenvironmentplus.org/building-tech-forum-2020/

Has anyone found/used a non-PVC peel-and-stick countertop film?  Working with a client on a corporate renovation, and while we've been able to find a non-PVC product for the kitchen cabinets, I can't seem to find one that works for horizontal surfaces.  And they're looking for a cost-effective and quick-turnaround solution so don't want to... Read more

We are working on a multi-family project in Hartford that is townhouse style so each unit has an exterior door. The client has requested electronic key fob hardware. Has anyone had experience with retrofitting a passive house door with electronic hardware or have they used a door that is already fitted with electronic hardware? 

With depth of thought and a broad view of the horizon, Candace Pearson can take a nuanced vision and sharpen it into focus, propelling the team around her forward. Operating in all three of BuildingGreen’s service offerings—publications, consulting, and peer networks—she finds pragmatic ways to fundamentally shift how we create our built... Read more

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more

Wanted to let everyone know that Nadav and I are very excited about gathering in Las Vegas for our very first Summit of the Small Firm SDL peer network! We'll meet Wednesday afternoon, June 5, for a 4-hour concentrated session from 1:30-5:30 in Room N205. Here's the agenda. A group of us will be meeting on Tuesday to refine the content and flow... Read more

Hi everyone -
Some of you already have heard some or all of this news, but I thought I'd share today's press release with the whole group.
The headline is: 
SERA is VERY excited to announce that David Johnson, formerly the managing partner of Bill McDonough's San Francisco office, is now heading up SERA's bay area office.... Read more

We have a client for whom we are designing a very high performance manufacturing facility, and they want to communicate their building's performance both dynamically and in real-time within their lobby for guests and staff.

We would like to mine the wisdom of this group to see what recommendations we can muster regarding high quality... Read more

Welcome to the quiz portion of Changing Building Design Priorities for a Changing Electrical Grid!

Learning Objectives
Upon completing this course, participants will be able to:


Define a “Highly Variable Renewable Energy” generation asset, or VRE, and understand how VREs can most effectively contribute to the... Read more

I've written waste and recycling policies many a time before for both construciton and operations... but in a volunteer committee application this morning, the maintenance team got bogged down on "how do we collect recycling without plastic bags" question. I told them there's not any kind of plastic bag that I'm aware of which can be thrown... Read more

Hi folks,

You may have seen this posted to the Green Gurus forum. Paula got some good responses from architects and engineers, but not so much from GCs so she asked me to follow up and post it here. Please reach out to her if you're willing to be included in these articles/reports. Thanks!

Hi! I’m working on two reports about... Read more