Blog Post

Resilient Design: Natural Cooling

This exterior window shade in Florida blocks most of the solar gain, yet allows some view out. Photo: Alex Wilson. Click on image to enlarge.

Over the past month-and-a-half, I've been focusing on resilient design--which will become all the more important in this age of climate change. Achieving resilience in homes not only involves keeping them comfortable in the winter months through lots of insulation and some passive solar gain (which I've covered in the previous two blogs), it also involves keeping them from getting too hot in the summer months if we lose power and our air conditioning systems stop working. This week, despite the freezing weather, we'll look at cooling-load-avoidance strategies and natural ventilation.

Orientation and building geometry

 

With new houses, we can relatively easily control orientation and geometrical form to minimize unwanted solar gain. The optimal orientation for a house is with the long axis running east-west, so that the longer walls face south and north. This allows the house to benefit from the sun when we want that heat, but keep it out when we don't want it. The sun always rises in the east and sets in the west, but in the summer it rises much higher in the sky. By having more windows facing south, most of the sunlight will glance off that glass during the summer when the sun high overhead, while in the winter, with the lower-angle sunlight, most of that sunlight shines through those windows--providing passive solar heating (see last week's blog). At the same time, having fewer windows on the east and west make sense relative to summertime overheating. Significantly more sunlight shines through a square foot of east- or west-facing window during the course of a day in the summer than through a square foot of south- or north-facing window, so limiting east and west windows helps to prevent overheating.

Window selection

The type of glazing in our windows has a major impact on how much sunlight is transmitted through them. This is why it almost always makes sense in well-insulated buildings to "tune" the windows by orientation. By this, I mean using glass (glazing) on the south that transmits a high percentage of the sunlight striking it and glass on the east and west that transmits less sunlight. We refer to this property as the solar heat gain coefficient (SHGC); it is the fraction of total solar energy transmitted through the glass (assuming the sunlight strikes the glass at a normal (perpendicular) angle.

SUPPORT INDEPENDENT SUSTAINABILITY REPORTING

BuildingGreen relies on our premium members, not on advertisers. Help make our work possible.

See membership options »

A good rule-of-thumb is to select south-facing windows that have SHGC values of 0.6 or higher (0.5 or higher with triple-glazed windows), and east- and west-facing windows with SHGC values of 0.3 or lower. Windows with SHGC values of 0.6 will transmit twice as much solar energy as windows with SHGC values of 0.3. The beauty of recent advances in glazings it that we can now have fairly large window areas (to provide views and natural lighting) without nearly the energy penalty (both from heat loss and unwanted solar gain) we had two or three decades ago.

Shading windows from direct sun

 

On the south, we can also use simple overhangs or awnings to block virtually all of the direct sun. On the east and west, different shading strategies are better, because the sun is lower in the sky. For these windows, exterior shade screens or roller blinds can be very effective. So can plantings of tall annuals like hollyhocks or vines like clematis, morning glory, and grape.

Designers and builders in the south learned the principles of shading windows long ago. Traditional architecture in hot climates often included wrap-around porches that kept direct sun out of the house, while providing pleasant outdoor living space. (Part of resilient design is looking at how our grandparents or great grandparents built--and returning to some of this vernacular architecture that is so well-adapted to the local climate.)

Reflective roofs and walls

Light-colored roofs and walls reflect, rather than absorb, most of the sunlight striking them. By not heating up as much, less heat is transmitted through to the interior. With high insulation levels in roofs and walls (see below), the need for reflective exterior surfaces is less important, but this strategy can still make a difference.

High insulation levels and tight construction

 

Just as an energy-efficient building envelope reduces heat loss in the winter, it also reduces unwanted heat gain during the summer--thus helping to control cooling loads and maintain comfort. If we follow the sort of recommendations for insulation levels for resilient homes that were outlined a couple weeks ago, unwanted heat gain will be very effectively controlled in the summer--as long as windows are closed during the hottest days.

Natural ventilation

Finally, we can achieve resilient homes that won't get too hot if power is lost and air conditioning doesn't work through natural ventilation. This strategy is particularly effective at night, when it's cooler outside than in. Simple operable windows with screens offer the primary strategy here, but we can go further. In hot, sunny climates, such as the Southwest, one can build solar chimneys that use the natural buoyancy of warm, rising air to pull in cooler outside air--sometimes through inlet tubes buried in the ground (earth tubes). Operable windows high on a wall or skylights can also serve as solar chimneys.

All of these natural cooling strategies can keep a house safe and reasonably comfortable in the summer during power outages. During normal times, such measures will significantly reduce the amount of time an air conditioner has to operate, while keeping the house more comfortable.

Alex is founder of BuildingGreen, Inc. and executive editor of Environmental Building News. To keep up with his latest articles and musings, you can sign up for his Twitter feed.

Published January 17, 2012

(2012, January 17). Resilient Design: Natural Cooling. Retrieved from https://www.buildinggreen.com/blog/resilient-design-natural-cooling

Add new comment

To post a comment, you need to register for a BuildingGreen Basic membership (free) or login to your existing profile.

Comments

January 18, 2012 - 6:38 am

Alex:
I found your blog on "Resilient Design: Natural Cooling" spot on but found the title a bit misleading. The examples given, while excellent, were mostly heat avoidance strategies, not natural cooling strategies. I had hoped this would focus much more on natural ventilation, and the effects of thermal mass, of earth contact and possibly some hybrid systems such as earth tubes or using solar walls to induce both day heating and night cooling ventilation coupled with thermal storage.
I realize space is limited in a blog but the natural ventilation could have gone much further in terms of the effects of window placement, the stack effect, etc. I agree; looking at the way some of our grandparents buildings were designed, particularly those in the southern climates, is very helpful. Examples or at least references to some of these houses as well as more recent examples would be most helpful. Perhaps this would make a good topic for a more expansive EBN article.
Some very exciting commercial examples of induced ventilation and storage include RNEL Research Support Center and for natural ventilation - the Hawaii Prep Academy Energy Lab (an LBC certified building which I have visited and have photos of).

Cheers,
Ralph