OVERVIEW
Materials really do matter to the health of occupants and the environment, but finding out what is in a product—and why—is not easy.
Products also have to perform as intended, so there are often tradeoffs between performance and the most sustainable materials.
Here you will find articles on:
-
the least hazardous, most environmentally sustainable materials used in products
-
environmental product declarations that can reveal the life-cycle impacts of materials
-
standards and third-party certifications that provide important VOC criteria and other health and performance metrics
-
chemicals of concern in building materials
You’ll also learn how what makes a product green can differ from product category to product category, and why multi-attribute vetting is critical no matter what product or material you’re selecting or specifying.
IN-DEPTH
Filter results:
- (-) Remove Blog Post filter Blog Post
- Feature Article (39) Apply Feature Article filter
- Feature Short (5) Apply Feature Short filter
- (-) Remove Infographic filter Infographic
- News Analysis (67) Apply News Analysis filter
- News Brief (66) Apply News Brief filter
- (-) Remove Op-Ed filter Op-Ed
- Primer (8) Apply Primer filter
- Product Review (33) Apply Product Review filter
- (-) Remove Reports, Courses, Study Guides, Live Webinars filter Reports, Courses, Study Guides, Live Webinars
- Webcast (5) Apply Webcast filter
-
The BuildingGreen Guide to Insulation
PDF Report
The BuildingGreen Guide to Insulation provides detailed guidance on insulation products and practices, including cost comparisons and detailed recommendations on what insulation to use, and what to avoid.
-
The Sustainable Spec Language You Should Be Using
Blog Post
Selecting the greenest products doesn’t do any good unless strong specifications support your choices. Here’s some language you can use.
-
Let’s Talk: Mainstreaming Transparency Takes More than Letters
Op-Ed
To move the building industry toward greener products, there are two big things we need to do.
-
Material Transparency for LEED v4: EPDs and HPDs for Metal Studs
Blog Post
Reducing your building’s carbon footprint or health impacts? Going after new LEED credits? Transparency documents for steel studs can help.
-
Wingnut Real-World Testing of Basement Waterproofing
Blog Post
A basement testing of UGL Drylok Extreme, Koster NB1 Grey, Xypex Concentrate negative-side waterproofing
-
Installing Insulation With the X-Floc Ventilated Dry Injection System
Blog Post
X-Floc claims the blowing equipment they use delivers cellulose at a more consistent density, and they were willing to prove it with this demonstration.
-
An Embarrassment of Riches: Products and Materials at Greenbuild 2017
Blog Post
A new focus on embodied carbon and LEED v4 are driving designers to dive deep into what we choose for our buildings
-
Pete’s Puzzle: Mold on Painted Clapboards is Food for Thought
Blog Post
There is mold on the factory-primed, latex top-coated wood clapboards on the south but not the north side of our house
-
Combining Sheathing With a WRB and Air Barrier
Blog Post
How well do Zip and ForceField sheathing integrate a structural panel with bulk water and air management?
-
Building Product Disclosure & Optimization (BPDO) Cheat Sheet
Infographic
The three Building Product Disclosure and Optimization (BPDO) credits in LEED v4 are pushing the industry into new territory. USGBC has done a great job defining and spurring manufacturers to support some options, but others are not yet (as of mid-2017) achievable, for a range of reasons. So go after the easy ones, and don’t waste time on others until they’re within reach.
