Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

Hi all - back in May I asked you for help reviewing our series ahead of publication. The first 5 posts are up, with the 6th a day or so away. Thanks to everyone who has helped out! 

It's a fail-forward effort to help us figure out what we are missing in our climate action on our projects and advocacy. Enjoy, and let me know if and how... Read more

Does anyone have a draft copy of the ASHRAE 209P standard? It has not been finalized? See an overview of it here from IBPSA 2016 summer meeting.

The 209 committee plans to release it for a 3rd public review and hopes to finalize it in late winter or early spring. I'm just trying to track down one of the earlier verisons of the document... Read more

Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

In simpler times, our buildings were made primarily from local, natural substances like stone, wood, straw, and clay.

But lifestyles have changed dramatically since these were... Read more

All,

We are collecting examples of buildings that involved electrification initiatives (building does not need to be all electric as long as largely electric). Please share your projects with us through this short survey. It will take 8-10min to complete.

The study will culminate into a report and best practices to advocate for... Read more

Hi everyone, 

We’re so excited to announce that registration for the first-ever “Summit for the Sages” is live! Register here and save your seat to join BuildingGreen, your Sages peers, and members of all three other networks in Omaha this Summer.

If you are in Sages and SDL and want to attend both summits, please check the “SDL... Read more

Hi Leaders,

We've pulled together some highlights from each of the three half-day cross-network workshops that happened in October. This report captures the gist of each workshop:

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Dear Colleagues:

This is a request from AIA COTE Advocacy to sign another petition on behalf of your firm. I know it's incomprehensible that we have to do this, but we at AIA COTE Advocacy think the US Federal Emergency Management Agency's removal of the term "climate change" from all their strategic planning documents is evidence of an... Read more

Welcome to the quiz portion of Go with the Flows: The Promise and Peril of Hygrothermal Modeling

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe the true role of hygrothermal modeling in design.
2. Name four instances in which to consider using hygrothermal modeling... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

We are working on a tenant improvement and want to determine the embodied carbon on bookshelves, product display cases, and desks. Initially finding that Tally is not reading furniture, casework, or fixture families. Are there any tips and tricks you have found to be successful for modeling or defining FFE items in Revit and quantifying... Read more

Hi All,

At the SCL Summit in November 2019, the Carbon Group discussed meeting in Q1 2019 to craft an action plan for measuring and voluntarily disclosing carbon emissions from our operations.   To kickoff that effort, we will be having an online meeting. 

If your company is already disclosing greenhouse emissions or if that's... Read more

Hi all,

I am on the planning committee for the National Adaptation Forum, which is an excellent conference (this will be the 6th annual) that has relatively little representation from architecture and engineering audiences. Our municipal and agency clients, as well as private sector, tend to attend this conference for climate adaptation... Read more

For those of you who I haven’t met yet, my name is Amanda and I just joined the BuildingGreen team as the new Peer Networks Administrator. It’s great to be here! I’m joining BG with a background in food justice education as well as rescue animal care. All of my prior experience has involved collaborating with small teams and working towards a... Read more

An induction range capable of replacing a standard gas range offers the potential of significantly reducing the energy required for ventilation in a commercial kitchen and improves IAQ at home.

We look for commercial-scale as well as residential induction cooktops and ranges designed to reduce indoor... Read more