Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

I would be interested to hear which parties in our group have participated in the CDP Program and how you are reporting your efforts.  I have talked to several contractors that just submit the data for their offices. I always feel like it is asking about our operations including the jobsites, and wonder how you get there.  I am very much... Read more

Welcome to the quiz portion of Building as an Organism: Understanding the Integrative Process Credit in LEED v4 Projects (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why integrative design is the key to cost-effective, high performance green buildings and LEED... Read more

Hello Green Gurus! 

We are planning a virtual Show & Tell and Happy Hour for Oct. 30th 7pm - 9pm ET (4pm - 6pm PT) with a Halloween theme, bring your best costumes! We will hold presentations (virtually of course!) for about the first 1 hour and 20 minutes and then will transition to some fun Happy Hour festivities, sharing, and... Read more

Is EV100 on your radars? We're reviewing our company leases and aleady have employee free access to EV charging at our office and jobsites by request (if technically feasible).

"With businesses owning over half of all new registered vehicles on the road, it is crucial that companies lead the shift to electric vehicles." Does your role in... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

Does anyone have an idea when the AIA Materials Pledge Reporting Framework will be available? Or is there a draft of what it looks like? 

BWBR is on a push to refine our approach towards materials. As AIA Material's Pledge signatory, we were hoping to incorporate the reporting framework into our efforts. Trying to get a sense of the... Read more

Andrea first became familiar with BuildingGreen in 2010 when she and her husband moved to Vermont and built their own passive house from the ground up. BuildingGreen’s president Nadav Malin heard about the project and asked if the staff could take a tour, and the rest is history. She joined the BuildingGreen team part-time in 2011 to work on... Read more

Hello Green Gurus,

On October 5th a number of Sustainable Design Leaders gathered for the Fall 2021 SDL Virtual Summit and the BuildingGreen team is happy to now share with you all the event report here!

This report can be shared publicly. If you think someone would like to see it, such as firm leadership or prospective Peer... Read more

Was anyone else surprised to see ASHRAE 228-2023 using eGRID Subregions for both the Regional Electricity Source Energy Conversion Factor and Regional Electricity Greenhouse Gas Emission Factors? In the past I have used eGRID sub-regions but also State and local utility conversion factors depending on what energy or operational carbon story I... Read more

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

Just highlighting a tool from Circular Ecology (the group that brings you the Inventory of Carbon and Energy data) for measuring Scope 1 and 2

https://circularecology.com/organisational-carbon-footprint-tool.html

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

In trying to help a client write a case study on avoided carbon by using slag and flyash, I am having trouble finding a one for one equivalency that can be verified.

I have found for one pound of flyash, one pound of carbon is saved - but I can't verify that.

Appreciate the feedback!

Hi all,

I see that this was a hot topic for the Winter Retreat this past year, but I am wondering how your firms manage standard materials across your practice. two aspects - standard specification items, and also designer choice materials. 

1. Do you have a spec baseline with high performance materials that you start with for all... Read more

All,

Beck is making great strides in our AIA 2030 Commitment and we are looking for an experienced energy modeler to join our team, please reach out if you know of anyone that is looking and has energy modeling experience.  the job is posted on our website:  https://beckgroup.applicantpro.com/jobs/1011136.html