BuildingGreen Report

Explainer

July 1, 1992
Wet-spray Cellulose

While dry cellulose in curtain-truss cavities provides a very attractive system environmentally, there are other—more common—ways of using cellulose insulation in walls. In new construction, the most common is wet-spray installation, in which cellulose is mixed with water and (often) an acrylic binder and sprayed into... Read more

News Analysis

July 1, 1992
Logging and the Spotted Owl

The recent ruling to allow logging on several thousand acres of old-growth forest in western Oregon was portrayed in the national media as a blow to environmentalists, but the action may not prove so damaging in the end. While the ruling permits logging on 13 of the 44 sites that were under consideration by the so-... Read more

Product Review

July 1, 1992
Formaldehyde-free Interior-grade MDF

Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more

News Analysis

July 1, 1992
A Twist on Global Warming

A study published in the June 5, 1992, issue of

Science by researchers at the Lawrence Livermore National Laboratory and the Institute of Atmospheric Physics at the University of Arizona suggests that smoke emitted into the atmosphere from human activities may be having a significant effect in counteracting... Read more

Product Review

July 1, 1992
CoverAge

Update: (September 26, 2006)

To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.

CoverAge is a tacky name for a great product that all remodelers should know about. It is a paintable, textured wallpaper that’s made entirely of recycled paper (at... Read more

Explainer

July 1, 1992
Curtain Trusses with Cellulose Insulation for a Timber Frame

Many timber-framers are aware of the problems with CFC-based foam insulation but continue to use urethane-core stress-skin panels because they haven’t found a better alternative. Well, here’s a technique adopted by a Massachusetts builder for low-budget timber frame homes. The... Read more

Feature

July 1, 1992

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Feature

Susan Maxman is the first AIA president to make sustainable design a priority. 

July 1, 1992
Interview with Susan Maxman, President, AIA 20 June 1992

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Feature

Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.

July 1, 1992

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Op-Ed

Introducing the first issue of our newsletter.

July 1, 1992
Welcome to Environmental Building News

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

News Brief

July 1, 1992

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Forum topic

Hi MEP Leaders,

I wanted to remind you that our monthly call is today, August 10th, at 2pm ET! This was rescheduled from the usual time - the second Tuesday of the month - due to a BuildingGreen staff retreat. If you usually can't make the Tuesday time, this is a great opportunity to join the call!

Here is the agenda, and below is... Read more

Forum topic

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Forum topic

reposting Arathi Gowda -

https://communityhub.aia.org/blogs/arathi-p-gowda-aia/2024/12/17/cote-ad...

The Advocacy team (part of the AIA COTE leadership group) would like to amplify actions the USGBC has gathered to defend the IRA. As you may know, the IRA is a bipartisan bill with 63,000 infrastructure projects starting nationwide... Read more

Forum topic

Hi Everyone -

I just received this note from Don Horn at the GSA (Deputy Director, Office of Federal High-Performance Buildings):

"Here's another installment of our work to reduce emissions through GSA's actions. GSA issued a press release this morning announcing our new standards for low carbon concrete and environmentally... Read more

Forum topic

Do you have the authority to start using only EVs in your renderings?  Let’s normalize and accelerate this change!

https://en.wikipedia.org/wiki/List_of_production_battery_electric_vehicles

Why are we showing gas cars in renderings of our green buildings?

Forum topic

Dear Colleagues:

This is a request from AIA COTE Advocacy to sign another petition on behalf of your firm. I know it's incomprehensible that we have to do this, but we at AIA COTE Advocacy think the US Federal Emergency Management Agency's removal of the term "climate change" from all their strategic planning documents is evidence of an... Read more

Forum topic

There has been some great press in the last couple of days related to Healthy Building Network's (HBN) newly released report "Chlorine & Building Materials Project".  That report is over 200 pages long, but there is some great commentary available that makes the top issues much quicker to grasp.

Chlorine is used to make PVC and PVC... Read more

Quiz

Welcome to the quiz portion of Go with the Flows: The Promise and Peril of Hygrothermal Modeling

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Describe the true role of hygrothermal modeling in design.
2. Name four instances in which to consider using hygrothermal modeling... Read more