Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

Dana Manafarm

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

All,

I wanted to spread the word to all of you that AIA Minnesota is hosting a virtual edition of Materials Matter, a five-part series starting next Wednesday 3/24, from 10AM-3PM Central Time on five Wednesdays throughout March, April and May. Come to one ($15 per session) or all ($60 for the whole series of 20 CEUs, including GBCI... Read more

Welcome to the quiz portion of EPDs Are the Future of the Building Industry, Whether You Like It or Not.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain how environmental product declarations (EPDs) are made, what they tell you, and how they're best used.
2. Describe... Read more

Hello all,

We are looking at ways we can use our specs to reduce toxicity in projects and one step towards that goal may be to require RoHS compliant lighting, switches, alarms, meters, etc., as required by the Small Electrical Components exception in the Living Building Challenge. Based on LBC projects I have been involved with, it... Read more

HI All,

I have been tasked with putting together a cost comparison of doing a LEED v4 Gold building vs. making that same building Passive House. Obviously they are two different systems, with two different outcomes, and it's not really intended as a total apples to apples cost comparison, but more a value comparison for a developer.... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

AIA is looking for additional technical review jurors for their 2022 COTE Top Ten Award program particularly in the Water/Ecosystems and Energy/Discovery categories.  If you are interested please go to this webpage and complete the form.

Time is of the essence, so please complete the form no later than Friday, January 14, 2022.

Solvents and other hazardous ingredients contained in flooring adhesives can pose a significant health risk and compromise indoor air quality.

BuildingGreen-Approved Flooring Adhesives

BuildingGreen approves flooring adhesives that

exceed South Coast Air Quality Management District (SCAQMD) 1168 VOC content limits and also... Read more

Hi all,

I'm trying to figure out how to use this CLF MEP calculator tool that is downloadable from the CLF website. Please see screenshot attached - does anybody know what they are asking for as an input?

"Custom quantities input: The user can enter custom quantities on this tab and produce numerical results. For data input fill '... Read more

BuildingGreen’s product vetting services can save you countless hours and set you up for success on future projects.

Is your team working on a LEED v4 or WELL project? 

Finding products for these projects is daunting, and even when you find products you believe will meet the requirements, you have to know exactly... Read more

My name is Douglas Flandro. I am the sustainable design leader at CambridgeSeven in Cambridge, MA. I started my career in film and theater design. I moved into museum exhibit design with a graduate degree in interior architecture at the Rhode Island School of Design in 2003. I still design museum exhibits for science museums, nature visitor... Read more

Hi All,
We have a date and time for the next SCL Carbon Working Group Meeting, "see" you there:

Topic: SCL Carbon Working Group Mtg #2
Time: Mar 31, 2020 09:00 AM Pacific Time (US and Canada)

Join Zoom Meeting
https://sellen.zoom.us/j/595221970

Meeting ID: 595 221 970

Dial in info:
        +1... Read more

It’s hard to believe COP28 is upon us. Kicking off tomorrow (11.30) and concluding 12.12, it’s sure to be a full few weeks of sharing, live streams, and interesting takes.

We’ve been excited to see a few Peer Network members represented as attendees in Architecture 2030’s (in-person and virtual) delegation.

Andrea Love (SDL),... Read more

Hi folks, 

SERA is pursing WELL certification on our new office headquarters in Portland. We'd like to pursue their innovation credits on carbon disclosures and reductions since there are great synergies with our LBC and Zero Carbon certification pursuits. We’re finding the WELL requirements for carbon disclosures to be quite different... Read more