Americus, Georgia-based Habitat for Humanity International is well-known for its coordination of locally based affordable housing projects. Working largely with donated materials and volunteer labor, Habitat (with its many local affiliates) is now one of the nation’s twenty largest homebuilders. Minimizing environmental impact has not... Read more

Cork has been used as a flooring material for more than one hundred years. Cork flooring is durable, it provides acoustical and thermal insulation, it cushions the foot, it is resistant to moisture damage and decay, it is fairly easy to clean, and it is harvested from trees in a sustainable manner. Though imported and thus energy-intensive to... Read more

At a workshop sponsored by Environment Canada’s Winnipeg, Manitoba office, participants decided to establish the Used Building Materials Association as a networking forum and common voice for the salvage and reuse industry. With a core group of twelve American and Canadian nonprofit and for-profit salvage and reuse organizations, the... Read more

The distinction of being the first government body to officially adopt a straw-bale construction code goes to the Napa County (California) Board of Supervisors. The Board adopted the voluntary guidelines in California’s new law, based on Assembly Bill 1314. The guidelines still require an engineer’s stamp on all plans, however, as does every... Read more

A campus for the new Dreamworks Studio at Playa Vista, formed last year by Steven Spielberg, Jeffrey Katzenberg, and David Geffen, will soon be under construction. Environmental consultant John Picard of E Squared is responsible for bringing an ecological design awareness to the project and coordinating design of the communications systems for... Read more

The San Francisco Institute of Architecture (SFIA) has just announced a new Master’s Degree program in Ecological Design. A professional certificate is also available, and the program is not limited to students of architecture. Enrollment is open for the Spring 1996 semester, which begins February 26. Contact the SFIA Information Office, Box... Read more

Thanks for your article on “Establishing Priorities.”

A workshop on the linking and prioritizing of environmental criteria in building assessments was held this past November in Toronto. Workshop organizers had hoped that the participants would help figure out ways to prioritize environmental criteria so that practitioners in the building industry can focus the most energy and attention where they... Read more

If our goal is to reduce the overall environmental impact of our building projects, we must begin paying more attention to the role automobiles play in these projects. Even the most environmentally responsible house—for example, an energy-independent, passive-solar house, built of salvaged and recycled materials, with graywater separation—will... Read more

The Woodworker’s Alliance for Rainforest Protection (WARP), a leading promoter of lesser-known species and other lumber from environmentally preferable sources, is changing its name to the “Good Wood Alliance.” Reasons for the change included a recognition that the environmental issues addressed are not limited to rainforests and that not all... Read more

With the Internet distribution this past August of a draft synthesis report by the three Working Groups of the Intergovernmental Panel on Climate Change (IPCC), suddenly global warming is back in the news. The report concludes that “the observed increase [in global temperature] over the last century (0.3°C–0.6°C... Read more

For years polystyrene has been just about the only game in town for exterior foundation insulation. The problem is that

extruded polystyrene—the type of polystyrene most commonly used on foundations—is produced with HCFCs that deplete ozone, and

all polystyrene (both extruded and... Read more

The Rainforest Action Network (RAN) has a new “Wood Reduction Clearinghouse” to disseminate information on ways to reduce waste and find environmentally sound alternatives to wood. Reducing wood use in construction is a primary goal of the service. Contact Dana Harmon at RAN, 450 Sansome Suite 700, San Francisco, CA 94111; 415/398-4404, 415/... Read more

How can we be confident that a particular manufacturer or company is committed to environmental improvements? There are certification systems for specific environmental claims, or for particular products, but as the best management practices and environmental goals evolve, how do we know that the... Read more

A few years ago, construction waste management and job-site source separation would have been considered nearly synonymous. It makes sense, after all, that if the materials have more value when separated by type, we should try to avoid mixing them together in the first place. While source separation still makes sense for many jobs and for... Read more

Steven Winter Associates, Inc., of Norwalk, Connecticut, has been awarded a grant through the U.S. Department of Energy’s 1995 Small Business Innovative Research program to design advanced modular townhouses for urban infill sites. The company has been charged with designing townhouses that employ renewable energy and energy conservation... Read more

I very much appreciate your recognition of the need for and efforts to identify priorities for “green building” (whatever that is). Such priorities can either be defined implicitly by the buildings a “green designer” creates or by some systematic process based on a hierarchy of environmental problems. Your... Read more

Environmental Building Consultants, 312 A Jefferson Ave., Cheltenham, PA 19012-2021; 215/663-1611, 215/663-1637 (fax), ehouse@omni.voicenet.com (e-mail); $50 for PC or Macintosh diskette containing database and software to run it.

This initial release of an IAQ products database contains about 450 listings... Read more

Building Industry Professionals for Environmental Responsibility (BIPER) is a new lobbying group founded to counter the frequently anti-environmental message governments receive from mainstream industry organizations. Annual membership is $35. Three levels of membership allow members to choose the frequency of contacts from the... Read more

The company uses Norwegian manufacturing equipment to produce 4’ x 8’ (1200 mm x 2400 mm) panels in 1⁄4” (6 mm) and 1⁄8” (3 mm) thicknesses. Thicker, 1⁄2” (13 mm) panels were initially produced as well, but... Read more