FILTER BY NETWORK

FILTER BY REGION

With the current push for improved window performance to meet energy codes and Passive House, room side low-e coatings can significantly improve window U-values. However, back in 2018 Payette did this excellent study that showed that while room side low-e coatings improved window U-value and increased the interior radiant temperature, the... Read more

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

Hello SDL Network,

I am working with members of the Seattle AIA COTE in planning an event that we are tentatively calling "Pathways to Decarbonization" or maybe "Decarbonization Success Stories".  The idea is for the COTE to identify entitities (school districts, local governments, higher-ed institutions, corporations, etc.) that have... Read more

Ace Brockwell

Dear SD Leaders,

As some of you may have heard, EHDD has been working for the last year in developing a data model to support early phase goal setting for holistic low carbon design. This data model is at the heart of our Early Phase Integrated Carbon (EPIC) assessment tool. EPIC is a data-driven goal-setting tool for use in the earliest... Read more

Hi Sages,

Thanks to those who filled out the survey and helped set our agenda for Monday's meeting. We know that this time doesn't work for everyone (no time could, of course), so we'll be alternating times each month. The April meeting will be Thursday, 4/11 at 3:00 eastern.

The agenda is here. It also has the Zoom link (in case... Read more

Hi - we're working with the University of California Office of the President to put together low-carbon case studies. The two types we are looking for now include 1) a low-carbon TI (not a full building gut/renovation), and 2) any that involve the circular economy (in this case not just building reuse but product reuse) which could include... Read more

Are your clients asking you about wellness? You’re not alone. Healthy interiors and wellbeing are the trending buzzwords of sustainable design. Lighting design for circadian rhythm and water filtration methods might be on the... Read more

Welcome to the quiz portion of Rethinking the All-Glass Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe eight reasons all-glass buildings are so popular in architecture today.
2. List the four elements Arup examined in their modeling of the effect of... Read more

I'm teaching a LEED GA study group and was rambling on the differences between CIR and precident-setting LEED Interpretation (that gets posted in the addenda library and all). Then I went onto LEED Online and was showing how those are submitted... but can't actually figure out how a LEED Interpretation would be submitted. Has anyone done this... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

Anyone else having this experience? We've got a LEED 2009 Core/Shell project that we've now been contracted to do a fitout within for one of the first tenants. If anyone else has had this experience and is willing to talk with me about how your process for it has gone, I'd be fantastically grateful.

Find me directly at awilson@asg-... Read more

It may take hundreds or thousands of years to return to pre-industrial-age levels of atmospheric carbon dioxide, but the loss of animal and plant species that is occurring today is, practically speaking, irreversible. It will take millions of years for evolution to fill the ecological niches being vacated by extinctions and restore healthy... Read more

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Hi,

There is a Blog section on the BIT User site. Will you have a blog post in time for launch? Or should we hide that section to begin with?

https://live-bituser.pantheonsite.io/blog

Andrea

Welcome to the quiz portion of Introduction to WELL Certification: On-Demand Webcast.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Identify the Seven Concepts within WELL.

2.  Describe the differences between WELL and other frameworks such as LEED & Fitwel.

3.  List... Read more

The Sages network is specifically for industry veterans and long-time Peer Network members, including those who are still active with one of the other networks and those who have moved on from that role. This group can help set priorities, drive advocacy, and... Read more