We are working on a tenant improvement and want to determine the embodied carbon on bookshelves, product display cases, and desks. Initially finding that Tally is not reading furniture, casework, or fixture families. Are there any tips and tricks you have found to be successful for modeling or defining FFE items in Revit and quantifying... Read more

In the Passive House session at the Winter Summit, I spoke about a Massachusetts DOER report that found that meeting the new energy code in MA (passive house or better in most cases) is cheaper for some building types than traditional construction. Some of you asked to see the report. It was a power point show. On page 34 of this slide deck... Read more

Hi SD Leaders: As you may know, The National Architectural Accreditation Board (NAAB) is currently drafting their proposed 2020 Conditions for Architectural Accreditation.  AIA COTE has prepared a response and believe it is critical that the NAAB accreditation process address the role of the architect in climate action and the projected impacts... Read more

Happy Earth Day! I'm sharing the results of our office Earth Day Mind Map, a collaborative event lead by our Green Team with office-wide participation. https://mm.tt/1471242441?t=4c76rJLKXz 

We are celebrating with a virtual happy hour later today and will use the Mind Map to generate conversation and sharing.

I would love to hear... Read more

Welcome to the quiz portion of Whole-Building Life-Cycle Assessment: Taking the Measure of a Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define key concepts of whole-building LCA.
2. Recognize the inherent flaws, and potential gains, of whole-building LCA... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Stick-framed walls are labor intensive and have to be sealed and insulated in the field, where conditions are not ideal; this can lead to poor thermal performance.

BuildingGreen-Approved Structural... Read more

Hello SCL,

We are getting back to our usual schedule of a pre-Greenbuild SCL Summit. We will be opening registration and announcing topics shortly. In the meantime, please pencil us into your calendar.

Date: September 25, 2023

Location: ZGF Architecture 600 14th St NW #800, Washington, DC 20005

Time: Soft start at... Read more

At Living Future last week a woman from Google asked about cost comparisons and I shared that the City of Santa Monica conducted a study analyzing the costs of a prototypical mixed-use project for a Living Building vs. LEED v4 Platinum vs. code compliant (Title 24, part 6). I thought this group might be interested as well so here is the link... Read more

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

Welcome to the quiz portion of Building Re-Entry with Arc

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the similarities and differences between LEED v4.1 O+M performance metrics and the Arc Re-Entry program.

2.  Understand how Arc Re-Entry contributes to an iterative re-... Read more

Does anyone have a draft copy of the ASHRAE 209P standard? It has not been finalized? See an overview of it here from IBPSA 2016 summer meeting.

The 209 committee plans to release it for a 3rd public review and hopes to finalize it in late winter or early spring. I'm just trying to track down one of the earlier verisons of the document... Read more

Congratulations on the site launch!  One problem, though... you appear to have overlooked the home page orientation video. Currently there's just a placeholder image that doesn't actually do anything. Did your team end up producing a BIT User video?

Hi everyone! The CLF Boston | NE Hub and BSA are holding an embodied carbon summit and we'd LOVE to see people from this group there. 

The first version of this summit was held in 2019, and since then we've made huge strides. Through our advocacy work, state and city regulations are addressing embodied carbon in procurement and materials... Read more

Hello All,

Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more

Hi Green Gurus!

Reaching out on behalf of the SDL "Expanding material re-use and including more people in the process" action group from the summer summit. (official name TBD - aka inclusive & circular economy, sustainable materials management, zero waste, deconstruction & reuse, etc.). In a nutshell ...unpacking where building... Read more

Hi MEP Leaders,

We had a great conversation in our last monthly call about the function and purpose of this group, and what we can best do together. You can see detailed notes from that call here. And we'll soon be sending out a reminder about the October call (Tuesday, Oct 8, 2pm eastern).

One of the ideas from that conversation... Read more

We are working on a multi-family project in Hartford that is townhouse style so each unit has an exterior door. The client has requested electronic key fob hardware. Has anyone had experience with retrofitting a passive house door with electronic hardware or have they used a door that is already fitted with electronic hardware?