Hi everyone,

I am writing to let you know about a change we are making here at BuildingGreen. We will be changing the name of this all-Peer Networks forum “Green Gurus” to “Green Commons.” 

We’ve made this decision after learning that using the term “guru” outside of its cultural context is appropriative. In an effort to center... Read more

There is a ton of stuff being posted about this, so this is definitely an area where it's nice to have had someone going through it and selecting the best. Thanks for doing that, Jen!

- These tips from 350.org have a great focus on connecting people and using different techniques. Their sample retreat shows how some of it might look in... Read more

Hello everyone,

So sorry that some of you couldn't get onto the call on Tuesday! There was a bit of a problem with our Zoom links. I think we've figured it out, so we should be all set next time.

Here are the notes from the call. If you have any questions about something on there, please feel free to post them here and we'll try... Read more

All,

For those who tuned into the Green Gurus presentation earlier this week, there was a question that came up during my presentation on NZE/NZC programs regarding whether ILFI allows the offsite renewable energy exception for LBC and Energy Petal projects (as opposed to NZE or NZC). I just double checked with them and it turns out they... Read more

Auto-quiz used for CEUs for attendees of the 2023 SCL Wintger Summit.

We are looking into different building skin materials from including GFRC and FRP (amongst others) as alternatives to precast. I remember years ago (when I was at LAS) we had retrofitted a Federal Courthouse with FRP for blast resistance. I kind of remember that at the time it had some pretty high offgassing concerns. I haven't been able to... Read more

Hi,

I believe a while back there was communication about a hard hat recycling program. Does anyone have any information about a hard hat recycling program? The contractors in the midwest have finally switched to the new style of hard hats with the chin strap and are requiring all subcontactors to comply by July 1, 2024. I'd like to... Read more

I am excited to announce that BuildingTransparency.org just launched downloadable specs and associated guidance that a couple of us have been working on for a few months.  Here is the EC3 announement:

Recycled plastic paneling is an appropriate use for some of the various post-consumer plastic materials entering the waste stream—in particular, high-density polyethylene (HDPE) from milk and detergent bottles.

BuildingGreen-Approved Panels

BuildingGreen approves plastic paneling products with high recycled content—in some cases... Read more

Wellness is key to sustainable design. As more and more clients understand the value of healthy built environments, designers need to understand the various wellness rating systems available, and which would meet the project's goals and needs.

WELL and Fitwel have emerged as the two leading wellness rating systems,... Read more

Welcome to the quiz portion of What Makes a Product Green?.

Learning Objectives
Upon completing this course, participants will be able to:


1. List and describe at least three attributes that address each of the following categories: "efficient use of materials"; "responsible sourcing"; "energy and water... Read more

Kelly provides administrative support to BuildingGreen projects, including major contracts as well as event planning, and logistics coordination for BuildingGreen’s network of sustainable design leaders. Among her projects, Kelly coordinated a large tri-state regional economic development project focused on the green goods and services industry... Read more

Hi Everyone!

I am now in my last week in the Bay Area, and in my last three weeks at (my first 15 years at) SERA, as I will be leaving on my extended sabbatical at the end of April!

I will miss following this group's dialogue, and will especially miss attending the summits for the next couple of years! 

My colleagues Mark... Read more

We are working on a multi-family project in Hartford that is townhouse style so each unit has an exterior door. The client has requested electronic key fob hardware. Has anyone had experience with retrofitting a passive house door with electronic hardware or have they used a door that is already fitted with electronic hardware? 

Our high performance consulting team is frustrated by project teams that regularly fall back on outdated rules of thumb in their system and equipment sizing. 

What challenges do you face in your work flow to limit oversizing and promote right-sizing?

By the way, Roger Chang, our literature search on the subject turned up an eleven... Read more

Hi MEP Leaders,

A reminder that our monthly call is next Tuesday, June 13, at 2:00pm ET, and all network members are welcome to join!

Here is the agenda and below is the Zoom link:

Join Zoom Meeting
https://us02web.zoom.us/j/83598691786?pwd=MjI2S01yZUJRSG4zcXRBNWtPbE5RZz09

Meeting ID: 835 9869 1786
... Read more