Championing the
Changemakers

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

We are working on a tenant improvement and want to determine the embodied carbon on bookshelves, product display cases, and desks. Initially finding that Tally is not reading furniture, casework, or fixture families. Are there any tips and tricks you have found to be successful for modeling or defining FFE items in Revit and quantifying... Read more

Greetings Heat Pump Water Heater (HPWH) advocates!

We have an opportunity to advocate to the US DOE on behalf of HPWHs!

Geoff Wickes is an emerging technology product manager for NEEA (Northwest Energy Efficiency Alliance) currently focused entirely on HPWH technology, policy, and market adoption (and in full disclosure: also a... Read more

Dear Colleagues:

This is a request from AIA COTE Advocacy to sign another petition on behalf of your firm. I know it's incomprehensible that we have to do this, but we at AIA COTE Advocacy think the US Federal Emergency Management Agency's removal of the term "climate change" from all their strategic planning documents is evidence of an... Read more

We've been doing some work gathering actual energy data on our recent projects. (In January we actually issued a report on 21 public buildings ). 

One of the biggest issues is getting access to the actual data - many clients don't want to share. 

Has anyone crafted proposal or contract language allowing/requiring design team... Read more

Hi All, 

As I mentioned at the summit, I'd like to start a discussion thread on knowledge management, company Intranets, and limiting Information overload as it pertains to sustainability. Those who are interested can share thoughts and experiences via this thread and maybe we'll set up an occasional phone call.  

Here are the... Read more

Commonly used for interior partitioning of commercial buildings, light-gauge steel framing is increasingly being used in residential construction. Compared to solid wood, steel studs are lightweight, dimensionally stable, resistant to insect damage, and of consistent quality. 

BuildingGreen-Approved Structural Steel

Products... Read more

Hi: I'm writing to share a unique opportunity to make a difference at SCALE as a Sustainability Manager at Amazon Global Services.

This comes from Lisa Matthiessen, FAIA, LEED Fellow who some of you may know. Lisa just joined Amazon's Worldwide Sustainability Team who is charged with making real their Net Zero for all operations by 2040... Read more

Is there a way for southface staff or guest experts to "pin" or "tag" the "right" answer in a forum question? It might be useful to designate the right answer and pin it to the top of a forum thread. I don't want the answer selected via crowd source but by staff or volunteers. Thanks.

I'm hoping for some help answering the question of whether buildings/communities should pursue net-zero energy on site versus investing in new renewable energy (i.e. through the electric utility) that can be built at a more efficient scale elsewhere in the state. Our utility is asking us this question as we are working through how to get the... Read more

Hi! I’m working on two reports about equity, diversity, and inclusion (EDI) in the building industry, and I’m looking for contributions from you or others in your firm. See below for what I’m looking for, and please reply directly to me at paula@buildinggreen.com.

NOTE: Ideally, I’m hoping people will want to provide names and firm names... Read more

Welcome to the quiz portion of Solar Thermal Hot Water, Heating, and Cooling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain active and passive; direct and indirect; and low-, medium-, and high-temperature solar thermal systems.
2. Distinguish between the three most... Read more

I've been hearing a lot of talk about density becoming a thing of the past. Like with the danger of antimicrobials, it would be great to have some more in depth backup information on whether density is really a danger factor, or if other factors are more important, when we go into these conversations. Does anybody have any new or better... Read more

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Welcome to the quiz portion of Is Wood Construction Green? A Look at the Issues.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Determine what distinguishes wood products sourced from Forest Stewardship Council-certified forests, and why these products improve the environmental impact of... Read more

We have several projects that are small enough that we don't hire consultants to run energy models. I just received permission to do some training so that I can run these models myself. I am looking at doing this training on eQuest:

https://www.udemy.com/course/equest-energy-modelling-detailedtraining/?c...

I am thinking it would... Read more

Hi all, we are embarking on an effort to standardize our LCA process in order to maintain a firmwide database of embodied carbon intensity from which we can create internal baselines and targets. I was wondering how other offices are setting boundaries for their LCA efforts. Below is our starting point. Most LCA will be conducted using Tally.... Read more