Hi all- 

DiMella Shaffer is seeking a Sustainability Practice Leader! For the last 2.5 years, I have been setting the structure in place, making change, and providing thought-leadership as the first Sustainability Practice Leader (director level leadership) at DiMella Shaffer in Boston. It has been a fantastic firm to work for and this... Read more

Since the launch of the Contractor’s Commitment in late 2020, nineteen companies have become signatories and many others are using the guidelines as a roadmap for their firms.   Now that the pilot year of the Contractor’s Commitment is complete, it is important to consider if and how the guidelines should evolve to be the most impactful.  Over... Read more

Welcome to the quiz portion of Introduction to Fitwel Certification: On-Demand Webcast.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Identify the different categories within Fitwel and the particular human health and wellness aspects.

2.  Describe the differences between Fitwel... Read more

Hello SCL peeps, 

Thank you to all the people who filled out our 2021 event survey. Your feedback did help us narrow down the options, but it was still inconclusive about whether there’s enough interest in doing an SCL-only Summit. 

To stay on schedule with our planning (and to make sure the event will pencil out financially), we... Read more

<iframe width="560" height="315" src="https://www.youtube.com/embed/7tCYQiWxxyA?si=lzTgKz9JaQ50_8HT" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

This question came to me via our mutual friend Josh Jacobs, but while interesting it's a bit out of my range of expertise... 

In short, a critical materials assessment specifically focused on airbourne byproducts from a manufacturing process that would be first-of-its-kind in the U.S. 

Hi- Happy Monday!  

Does anyone know if there is an open-source list of manufacturers that have take-back programs? Looking for a summary/spreadsheet with details (costs, qty, etc). I have a small list but I'm guessing there is already one out there...

Also, Doesn't stage D in LCA account for take-back programs? Could this be... Read more

D.J. Greenspecher

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

All,

Our firm has been struggling to find carbon reduction strategies for concrete that move us beyond a fly ash only approach. Frankly, the knowledge just isn't there internally or with our consultants. We've known that there are a few folks out there that have a deep bag of tricks, but we haven't had the chance to work with them... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

Hello Sustainable Community Design Leaders!

Let’s take a moment, introduce ourselves, and get to know each other and our work! Don’t forget to fill out your BG.com profile with your headshot and bio; this is how everyone across Green Gurus can see you in the Member Directory. 

I’ll kick us off! I'm RoseAnn, I also go by Rose, Peer... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

I've been hearing recommendations for bipolar ionization, as a way to filter airborne virus particles in HVAC systems while avoiding the energy penalty of increased ventilation. However, I've also heard that ionizing equipment is dangerous because it produces ozone.

Does anyone have any insight into the effectiveness and/or cautions... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hi all,

All members of the WA Building Code Council received an email from Tim Attebery of the Washington State AGC and I'm trying to make sense of the role of the AGC and whether it is representing the consensus option of general contractors in Washington or not. The letter is very much against the energy code advancement, which... Read more

Hello Sustainable Community Design Leaders,

The SDL Winter Summit (Jan 23-25, Tempe AZ) has a few spots still open, so we are excited to invite SCDL members to join! This is an opportunity to plug into the conversations happening in the Sustainable Design Leaders group, plus a possible chance to carve out some in-person SCDL time.