Hello,

We are having a discussion / a bit of a debate in our office about the merits and sustainability of different roofing materials. Our current standard is to use a PVC membrane, which we all know is highly toxic. TPO is an obvious alternative that is less toxic, but it has some performance concerns and can often lead to leaking (not... Read more

Anyone have experience with electric boilers? I think in cold climates it's perhaps the first thought when trying to reduce scope 1 emissions in an HVAC application that would have historically used gas-fired boilers... but it seems like they're only an incremental improvement compared to heat pumps / geothermal / VRF type solutions. We haven't... Read more

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

With the current push for improved window performance to meet energy codes and Passive House, room side low-e coatings can significantly improve window U-values. However, back in 2018 Payette did this excellent study that showed that while room side low-e coatings improved window U-value and increased the interior radiant temperature, the... Read more

Hello SDL Leaders,

Over the past month, I have been working with ILFI to navigate the question of residuals in LBC compliant products vs. products reporting for a Declare label.

Through our conversations, it came to light that ILFI considers the LBC Red List threshold to be 10,000 ppm, rather than the 100 ppm written into the... Read more

Hi All - 

Has anyone explored hydronic system analysis software (1D CFD)? 

Some options are PipeFlo, AFT Fathom, PipeFlow (eerily similar name to first option), COMSOL Pipe Flow Module. 

Applications could range from general system troubleshooting, pump sizing, to district hydronic system network analysis. 

Best,... Read more

Welcome to the quiz portion of Certified Wood Update: Comparing SFI to FSC on Key Forestry and Health Issues.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the purpose of forest management standards and what they measure.
2. Differentiate between FSC and SFI... Read more

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Hi everyone,

I'm interested in identifying any in-person opportunities (local to Greater Boston) to engage my office during Earth Week. We are all excited to be able to do things in person now, so if anyone has anything on their radar please let me know (a panel, educational activity, or volunteer opportunity!)
 

Thanks,... Read more

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

This summit was pre-approved for  6 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please first check your profile to be sure your information is... Read more

Seeking Pros/Cons, Feedback/Commentary about signing the US Architects Declare Commitment. 

https://us.architectsdeclare.com/

Reviewing against the "shoulds" and "shalls" of the 2020 AIA Code of Ethics and Professional Conduct ... and other commitments that are out there ... any feedback welcome.

Tips for how your workflow... Read more

Hello AEC Sustainability Leaders (aka the Green Gurus)!

As we continue to promote and expand the use of mass timber on our projects, it is becoming increasingly important that we learn more about the spectrum of impacts that this material selection is having on the forests and communities from which we’re sourcing our wood fiber…both... Read more

Hello - I have met several of you virtually over the last couple years. My name is Megan Zack and I am excited to share that I have changed positions and will be the Cheif Sustainabilty Officer at Wight & Company. After spending the last 20 years working as an architect with a small percentage of my time dedicated to sustainabilty, I'll be... Read more

CALL for applications: national COTE Leadership Group

We need you! Or the dedicated, enegetic people you know ... 

Please consider encouraging applications (or applying yourself) for the the COTE Leadership Group. 

We have 2 1-year slots this year ... plus 3 3-year slots ... and we are looking for a diverse slate (diversity... Read more

Curious to see if your firms have researched metals and established a preference for what you use for roof and wall panels?  I'm interested in ranking environmental performance for painted steel, galvanize steel, weathered steel, painted aluminum, zinc, etc.