Building Area Method & Space-by-Space Method

Forum discussion

Building Area Method & Space-by-Space Method

May 18, 2015

Hello.
I am working in a Multifamily LEED Project.
The building has 75 Dwelling, Parking, Gym, Audience/Seating Area, Bar & Dinning Area, Corridor...

I would like to use Building Area Method, because if i use Space-by-Space Method, the model would have more of 700 zones by dividing each Dwelling in several areas such as bedroom, living room, kitchen, bathroom ...
But if i use Buiding Area Method, I can´t use specific uses for the rest of areas that are not dwelling (Gym, Audience/Seating Area, Bar & Dinning Area...)

What is the best approach that I can use in my model?

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

Credit Complance/Justification in Spanish

Forum discussion

Credit Complance/Justification in Spanish

March 25, 2015

For justifiying compliance with LEED credits for a Project in Spain, can supporting documentation, management plans, etc. be in Spanish (which they need to be so they can be correctly understood and implemented), and uploaded on the credit application templates as such, or should they be translated into English so that the LEED reviewers can properly assess their content for compliance?

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

Error in eQUEST in the Perform Compliance Analysis

Forum discussion

Error in eQUEST in the Perform Compliance Analysis

March 7, 2015

Dear all,
I am stuck with an error from eQUEST. We have defined the proposed building and when we want to perform the compliance analysis the baseline is not generated and the analysis is not completed due to an error:
"Table look-up failed: AS901-07 Envelope (1,5) evaluating rule: Look up and default C-CFACTOR"
and
"Table look-up failed: AS901-07 Envelope (1,4) evaluating rule: Look up and default C-FFACTOR"

We do not know what to do and if it just a problem of the baseline generator or it is something else wrong in the model.

Thank you in advance and sunny regards.

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

Glare control

Forum discussion

Glare control

February 17, 2015

Hi,

We're working in a project trying to achieve this credit by option 3 (measurement).
Our façade is an existing curtain wall. There are two different skins. The exterior one has solar control.
Could this be considered as glare control for this credit?.
We've seem that depending on which document we are using lower limit is 10 or 25 fc. Could someone confirm which one we have to use?.

Thanks in advantage

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

LEED for Homes V4 International

Forum discussion

LEED for Homes V4 International

February 14, 2015

I am looking for a Green Rater for a multifamily project in Europe. Anyone ? Would not mind getting trained as a Green Rater myself in the process...

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

Simulation software and Ashrae 90.1 version

Forum discussion

Simulation software and Ashrae 90.1 version

February 12, 2015

Hi,

we are certifying a new C&S building, in v2009.

The version of Ashrae 90.1 to follow is 2007? Or do we have to change to 2010?

Also, do you know if Trnsys is an accepted software to modelling in EAc1 and EAp2?

Thanks

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

Different outdoor air flow rates between Models

Forum discussion

Different outdoor air flow rates between Models

February 10, 2015

Hello,

We hace just received the preliminary review comments for a Data Center. We used the Minimum Energy Performance Data Center Calculator spreadsheet in order to define the IT Server energy and Electrical Systems Efficiency Savings, and were able to show almost 70% in energy savings mainly because of the amount of virtual machines implemented in this Data Center. One of the review comments is that the outdoor air flow rates should be identical between baseline and proposed models, not proportional, but there is a huge difference in the internal heat gains between models (because of the virtual machines in proposed model) and hence also the amount of air flow rate is also very different, so entering the same amount of outdoor air does not seem very reasonable. Any suggestions? Comments?

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

Residential building above

Forum discussion

Residential building above

November 28, 2014

I am thinking of upgrading a v2009 project to V4 but I am concerned if I will meet the requirements of this prerrequisite.

The project is a retail store with a terrace at ground floor of a residential building. I can prohibit smoking in the exterior space of my terrace.

But I cannot prohibit people walking the street to smoke and they may pass by nearest than 25 feet of the entrance. Also above the retail store there are some apartments. Smoking in common areas of the building is prohibited but I cannot prohibit them to smoke in their houses or balconies.

Will I meet the requirements of this prerrequisite?
Thank you

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

The year of metering

Forum discussion

The year of metering

November 20, 2014

Must be the year of metering after the registration of the project or can be used a year of metering of before?

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

off-site land outside USA

Forum discussion

off-site land outside USA

November 6, 2014

In order to comply with the alternative option we would choose to donate land to a land trust within the same EPA Level III Ecoregion identified for the project site. The land trust must adhere to the Land Trust Alliance ‘Land Trust Standards and Practices’ 2004 Revision. Is there any alternative definition for a land trust in a European context?

Post a reply

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.